1-576779-0 Tyco Electronics, 1-576779-0 Datasheet - Page 2

• Manufacturer Part Number: 1-576779-0
• Description: TOOL HEAD CRIMP 20AWG STRATO
• Manufacturer: Tyco Electronics
• Series: Strato-Therm™r

Specifications of 1-576779-0

• Connector Type: PIDG Strato-Therm Terminal
• Crimp Handle: 1901235, 525432-1
• Crimp Or Cable Size: 2 AWG
• For Use With: 525432-1 - TOOL ADAPTER HEAVY HEAD ASSY152661 - CONN RING TONG 20AWG #1/4 PIDG152654 - CONN RING TONG 20AWG #4 PIDG152899 - CONN RING TONG 20AWG #2 PIDG152894 - CONN RING TONGUE 20AWG #8152890 - CONN RING TONGUE 20AWG #1/4152656 - CONN RING TONGUE 20AWG #8 PIDG152896 - CONN RING STR 20AWG M3.5 TIN152892 - CONN RING STR 20AWG #10 TIN152891 - CONN RING STR 20AWG #10 TIN152658 - CONN RING STR 20AWG #6 TIN PIDG152657 - CONN RING STR 20AWG #10 PIDG154924 - CONN RING TONGUE 20AWG #4 PIDG152895 - CONN RING TONGUE 20AWG #6152655 - CONN RING TONGUE 20AWG #6
• Lead Free Status / RoHS Status: Not applicable / Not applicable

Battery Powered Crimp Tool Kit 1901235–[ ] with
HHHT Adapter comes with the HHHT adapter already
installed on the battery powered hand tool. The only
installation required is the installation of the crimping
heads.
As supplied, the adapter has three quick–release pins
installed (Figure 1). The two outer pins will be used to
secure the links of the crimp head (exposed portion of
the crimp head) to the adapter. The center pin will be
used to secure the movable die of the crimp head to
the ram of the adapter.
These pins must be removed prior to installing the
crimping head.
!
!
Do not operate the tool without the HHHT
adapter installed. Damage to the ram or seals
can result.
Do not operate the tool without a hand tool crimp
head installed. Damage to the adapter can result.
To avoid personal injury, be sure to exercise
extreme caution when handling the crimp tool.
Remove the battery before installing or removing
the crimping heads.
Figure 2
To remove the crimping head, it will be necessary to
remove the quick–release pins and the crimp head
from the battery powered crimp tool.
i
i
1. Remove the quick–release pins, described
above.
2. Insert the exposed portion of the crimp head
into the adapter cavity. See Figure 1.
3. Insert the two outer quick–release pins
through the holes in the adapter, and through
the holes in the links of the crimping head.
4. Insert the center quick–release pin into the
adapter and through the holes in the ram and
the moveable die of the crimp head.
The quick-release pins will snap" into position
when they are properly inserted.
The quick-release pin will snap" into position
when it is properly inserted.
To avoid personal injury, remove the battery
before removing the crimping heads.