140-0000-951 Emerson Network Power, 140-0000-951 Datasheet - Page 221

• Manufacturer Part Number: 140-0000-951
• Description: DIE SET MCX/SMB/SMC/SMA 75OHM SM
• Manufacturer: Emerson Network Power

Specifications of 140-0000-951

• Connector Type: MCX, SMB, SMC, SMA, 75 Ohm SMB
• Crimp Handle: J572-ND
• Crimp Or Cable Size: RG/U-178, 316, 316DS, 58, 142, 735A, LMR-100, LMR-195, LMR-200
• Product: Crimping, Stripping & Cutting Tools & Drills
• Description/function: Die for (RG 178, 316/DS, 58, 142, 735A, LMR-100, 195, 200)
• For Use With: J572 - ACC FRAME FOR HAND CRIMP TOOL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 1400000951; J573

SMA Right Angle Solder Type
Plug for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
RG-405/U (.086 Semi-Rigid)
RG-402/U (.141 Semi-Rigid)
CABLE GROUP
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Insert cable into body making certain that the
4. Solder body to cable using 60/40 tin/lead solder
5. Press end cap into body access port using .187
center conductor during strip operations.
cable jacket is butted against internal body shoul-
der and cable dielectric is started into cross hole.
Solder center conductor to contact using 60/40
tin/lead solder as shown. Use a minimum amount
of solder for a good joint.
as shown. Use a minimum of heat to minimize
cable dielectric growth. Any growth of cable
dielectric shall be flush with contact.
(4.75) dia. flat punch.
142-0693-101/106
142-0694-101/106
PART NO.
.145 (3.68)
.170 (4.32)
“A”
.075 (1.90)
.105 (2.67)
“B”
221