1579004-8 Tyco Electronics, 1579004-8 Datasheet - Page 29

• Manufacturer Part Number: 1579004-8
• Description: TOOL HAND CRIMP SOLARLOK
• Manufacturer: Tyco Electronics
• Series: Solarlok®r

Specifications of 1579004-8

• Tool Type: Crimp Tool
• Features: Side Entry, Ratchet
• For Use With/related Products: Heavy Duty Contacts, 10-15.5 AWG
• For Use With: 5-1105301-1 - HVT-C-BU.AG.4,0 QMM4-1105301-1 - HVT-C-BU.AG.2,5 QMM5-1105300-1 - HVT-C-STI.AG.4,0 QMM4-1105300-1 - HVT-C-STI.AG.2,5 QMM3-1105300-1 - HVT-C-STI.AG.1,5 QMM3-1105301-1 - CONN SOCKET 15.5 AWG CRIMP SIVER
• Lead Free Status / RoHS Status: Not applicable / Not applicable

3.4 DC/AC Converter Receptacle
SOLARLOK Interconnection System
Assembly and Installation Guidelines
1 Place a single wire seal onto the wire and strip wire
2 Crimp the contact using the correct applicator for the wire gauge (# 114-74013)
3 Place O-ring onto the connector housing; push in wire to stop until contact locks into the housing
4 Push seal into the housing
5 Assembly of the cover cap (not available with every version) and mounting in front panel
■
■
■
All specifications subject to change. Consult Tyco Electronics for latest specifications.
(single wire seals are not available with every version).
Required panel mount hole diameter: Diameter 12.5 mm.
The panel thickness must not be under 1.0 mm.
For environmental protection of the unmated connector, use of the covering cap is recommended.
Cover:
Part No. 1394739-1
(continued)
Catalog 889753-3
Revised 6-2008
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 9
27