2-231652-8 Tyco Electronics, 2-231652-8 Datasheet - Page 5

• Manufacturer Part Number: 2-231652-8
• Description: TOOL CRIMP MOD 2,4,6POS WITH DIE
• Manufacturer: Tyco Electronics

Specifications of 2-231652-8

• Tool Type: Hand Crimper, Cutter, Stripper
• Features: Top Entry, Ratchet
• Crimp Tool: Hand Held Crimp Tool
• Color: Blue
• Product: Tools
• For Use With: 554603-2 - CONN MOD PLUG 6-6 ROUND554603-1 - CONN MOD PLUG 6-6 ROUND5-569032-2 - CONN MOD PLUG 6-6 ROUND SOLID5-554710-1 - CONN MOD PLUG 6-6 ROUND STRANDED5-557971-3 - CONN MOD PLUG 6-6 FLAT OVAL5-557970-2 - CONN MOD PLUG 6-6 FLAT OVAL5-569031-2 - CONN MOD PLUG 6-4 ROUND STRANDED5-557967-2 - CONN MOD PLUG 4-4 FLAT OVAL5-557965-3 - CONN MOD PLUG 6-4 FLAT OVAL5-556200-2 - CONN MOD PLUG 4-4 FLAT OVAL5-641334-1 - CONN MOD PLUG 4-4 FLAT OVAL5-569032-3 - CONN PLUG MOD 6POS ROUND SOLID5-569030-3 - CONN PLUG MOD 4POS ROUND SOLID5-569031-3 - CONN PLUG MOD 4POS STRANDED WIRE5-641337-2 - MOD PLUG ASSY/6POS/LINE 1000/BOX5-641337-4 - MOD PLUG ASSY/6 POS/LINE 25/BAG5-641337-1 - MOD PLUG ASSY, 6 POSN, LINE5-641335-7 - MOD PLUG ASSY/4POS/LINE 25/PKG5-641335-1 - MOD PLUG ASSY, 4 POSN, LINE5-641334-7 - MOD PLUG ASSY/4POS/HNDSET 1000PC5-641334-2 - MOD PLUG ASSY/4POS/HNDSET 1000PCA24921 - CONN MOD PLUG 6-2 FLAT OVAL AUA24922 - CONN MOD PLUG 6-4 FLAT OVAL AU5-556384-2 - MOD PLG ASSY/4POS/SLD WR 1000PC5-555042-4 - MOD PLG ASSY/6POS/24-26 AWG 25PC5-555042-2 - MOD PLUG ASSY/6 POS/24-26 AWG5-554710-4 - MOD PLG ASSY/6POS/ROUND CBL 25PC5-554710-2 - MOD PLG ASSY/6POS/ROUNDCABLEA9119 - CONN MOD PLUG 6-6 FLAT OVAL AUA9118 - CONN MOD PLUG 6-6 FLAT OVAL AUA9117 - CONN MOD PLUG 6-6 ROUND STRANDEDA9116 - CONN MOD PLUG 6-4 FLAT OVAL AU5-641335-2 - CONN PLUG MOD 6-4POS 50GOLDA9093 - CONN MOD PLUG 6-6 FLAT OVAL AUA9092 - CONN MOD PLUG 6-4 FLAT OVAL AUA9091 - CONN MOD PLUG 4-4 FLAT OVAL AU
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Modular - RJ22 (4p4c), RJ11/12 ((6p6c)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1-231652-2; 1-231652-8; 231652-2; A9901

5.3. Replacing Flat Oval Cable Stripper Blades
If the flat oval cable stripper blades are worn or
damaged, replace the fixed blade assembly and
movable blade assembly according to the following.
Rev M
Movable Blade
Assembly
CAUTION: DO NOT cycle the tool without a die in place.
Screw
(2 Places)
Beveled Edges of
Blades Face Inward
Fixed Blade
Assembly
Movable Blade
Assembly
1. Remove the four screws holding both blades in
place. Remove fixed blade assembly and movable
blade assembly from tool.
NOTE
i
Replacing Blades in Flat Oval Cable Stripper
Adjusting Flat Oval Cable Stripper
The recommended shim thickness does not
account for larger than normal conductor insulation.
Adjust the blade gap according to your specific
needs.
6.4 [.25] (Length) Screw (2 Places)
Figure 8
Die Set Must Be
Installed in Tool
Cable (Ref)
Fixed Blade
Support Plate
Movable Blade
Support Plate
Blade Set-Up
Gage (Ref)
9.7 [.38]
(Length)
Screws
(2 Places)
(Figure 8)
6. MAINTENANCE AND INSPECTION
Inspect the tool and die set immediately upon arrival at
your facility and at regularly-scheduled intervals
thereafter to ensure that they have not been damaged.
When not in use, store tool with handles closed in a
clean, dry area.
6.1. Daily Maintenance
Foreign particles should be cleaned from the tool
using a soft, clean, lint-free cloth or brush. Make sure
all pins, rings and other retaining hardware is in place,
and that the die set is undamaged. Lightly lubricate all
pins, pivot points, and bearing surfaces using a good
grade SAE 20 motor oil. DO NOT lubricate
excessively.
6.2. Periodic Inspection
It is recommended that the following inspections be
conducted at least once a month by quality control
personnel. More frequent inspections should be
conducted if your work environment, company
standards, or amount of tool use indicates the need.
A. Visual Inspection
Remove die set from the tool; then, remove all
lubrication and accumulated film and debris by
immersing the dies and tool head in a mild commercial
degreaser.
CAUTION
CAUTION
CAUTION
2. Position new blades onto tool with beveled edges
facing inward.
3. Install and tighten screws. Adjust flat oval cable
stripper according to Paragraph 5.2.
1. Check for missing or defective pins, rings, or
other retaining hardware. Replace parts as
necessary.
2. Closely inspect dies for damage, giving special
attention to bearing surfaces and surfaces that
contact the product. Worn, cracked, pitted, or
chipped indenter or nest surfaces, or other obvious
wear or damage to the die set or tool head requires
removal of the affected part from service.
!
!
!
DO NOT cycle the tool without a die in place;
otherwise, damage to the stripping blades may
occur.
Failure to perform daily maintenance and periodic
inspection can cause defective modular plug
terminations, leading to discontinuities on individual
wire circuits.
DO NOT lubricate surfaces of the die set that
contact the product. These areas must be kept
clean to ensure a usable modular plug assembly.
408-9767
5 of 7