80PK-11 Fluke Electronics, 80PK-11 Datasheet - Page 2
![no-image](/images/no-image-200.jpg)
80PK-11
Manufacturer Part Number
80PK-11
Description
PROBE TEMP THERMOCOUPLE TYPE-K
Manufacturer
Fluke Electronics
Series
SureGrip™r
Type
K-Type Thermocoupler
Datasheet
1.80PK-11.pdf
(2 pages)
Specifications of 80PK-11
Usage
HVAC
Tip - Type
Contact, Cuff
Plug Type
Sub-Mini (Thermocouple Plug)
Probe Temperature Range
-22 ~ 221°F (-30 ~ 105°C)
Cable Length
39.370" (1000.00mm)
Cable Insulation
Plastic
Plug Color
Yellow
For Use With
614-1037 - THERMOMETER HVACPRO IR
Lead Free Status / RoHS Status
Lead free by exemption / RoHS compliant by exemption
Probe Length
-
Probe Material
-
Other names
2724500
Measurement Considerations
Instrument Compatibility
The 80PK-11 is designed to be compatible with any temperature
measuring instrument that accepts Type-K thermocouples, has a
miniature thermocouple connector, and has cold reference
junction compensation. Accuracy of the temperature measuring
instrument must be considered along with the 80PK-11 accuracy
specification in order to determine the overall accuracy of the
combination.
Temperature Limitations
The 200 ºC (392 ºF) continuous temperature rating of the
80PK-11 is primarily determined by the Hytrel insulation. The
bead alone may be momentarily subjected to higher
temperatures without damage.
Media Limitations
Type-K Chromel-Alumel thermocouple wires are compatible with
clean oxidizing atmospheres.
Operation
Use the 80PK-11 as follows:
Repeated sharp bending can break the 80PK-11
lead. To protect the lead, avoid sharp bends,
especially near the connector.
1.
2.
3.
4.
Connect the probe to a compatible Type-K measuring
instrument using the miniature thermocouple connector
(0.500 in pin spacing).
Turn on the measuring instrument and select the
appropriate range and scale.
Check the readout on the measuring instrument. With
no heat or cold source applied to the sensor, it should
display the ambient (room) temperature.
Wrap the probe firmly around the object you wish to
measure. The readout will give you the source
temperature.
WCaution