ACASN1002E1002P1AT Vishay, ACASN1002E1002P1AT Datasheet - Page 5

• Manufacturer Part Number: ACASN1002E1002P1AT
• Description: RES ARRAY 10K/10K OHM 2RES SMD
• Manufacturer: Vishay
• Series: ACA - Automotiver

Specifications of ACASN1002E1002P1AT

• Resistance (ohms): 10K
• Number Of Resistors: 2
• Circuit Type: Isolated
• Temperature Coefficient: ±25ppm/°C
• Tolerance: ±0.25%
• Power Per Element: 125mW
• Number Of Pins: 4
• Package / Case: 0605 (1615 Metric), Convex
• Size / Dimension: 0.063" L x 0.059" W (1.60mm x 1.50mm)
• Height: 0.018" (0.45mm)
• Mounting Type: Surface Mount
• Operating Temperature: -55°C ~ 125°C
• Product Type: Arrays
• Resistance: 10 KOhms, 10 KOhms
• Power Rating: 0.15 Watt
• Dimensions: 1.6 mm W x 1.5 mm L x 0.45 mm H
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ACASA-10K/10K-NATTR; ACASA-10K/10K-NATTR; ACASN-10K/10K-EATTR

www.vishay.com
280
ACAS 0606 AT, ACAS 0612 AT - Precision
Vishay Beyschlag
DESCRIPTION
The production of the components is strictly controlled and
follows an extensive set of instructions established for
reproducibility. A homogeneous film of metal alloy is
deposited on a high grade (96 % Al
using a mask to separate the adjacent resistors and
conditioned to achieve the desired temperature coefficient.
Specially designed inner contacts are realized on both sides.
A special laser is used to achieve the target value by
smoothly cutting a meander groove in the resistive layer
without damaging the ceramics.
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using reflow or vapour phase as shown in
IEC 61760-1
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions.
The suitability of conformal coatings, if applied, shall be
qualified by appropriate means to ensure the long-term
stability of the whole system. The resistors are RoHS
compliant; the pure tin plating provides compatibility with
lead (Pb)-free and lead-containing soldering processes. The
permitted storage time is 20 years, whereas the solderability
is specified for 2 years after production or requalification. The
immunity of the plating against tin whisker growth has been
proven under extensive testing.
Notes
(1)
(2)
(3)
FUNCTIONAL PERFORMANCE
Global Automotive Declarable Substance List, see
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see
environmental policy group → chemicals → jig → Joint Industry Guide (JIG-101 Ed 2.0)
The quoted IEC standards are also released as EN standards with the same number and identical contents
For permissible resistance change please refer to table MAXIMUM RESISTANCE CHANGE AT RATED POWER, above
(3)
. The encapsulation is resistant to all cleaning
Derating
100
80
60
40
20
0
- 55
2
For technical questions, contact:
O
3
) ceramic substrate
Precision Thin Film Chip Resistor Array
0
www.gadsl.org
Superior Moisture Resistivity
50
70
[e-mail]
The resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
The result of the determined production is verified by an
extensive
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with IEC 60286-3
All
CEFIC-EECA-EICTA
hazardous substances. This includes full compliance with
the following directives:
•
• 2002/95/EC Restriction of the use of Hazardous
• 2002/96/EC Waste Electrical and Electronic Equipment
APPROVALS
The chip resistor array is AEC-Q200 qualified.
Where applicable, the resistors are tested in accordance with
EN 140401-801 which refers to EN 60115-1 and EN 140400.
2000/53/EC End of Vehicle life Directive (ELV) and
Annex II (ELV II)
Substances directive (RoHS)
Directive (WEEE)
products
100
Ambient Temperature in °C
testing
125
comply
procedure
Power Mode
Standard Mode
(2)
155
with
list
(3)
of
the
.
180
and
www.eicta.org
Document Number: 28770
legal
GADSL
optical
Revision: 06-Nov-09
restrictions
(1)
→ policy →
inspection
and
the
on