MNR12E0ABJ331 Rohm Semiconductor, MNR12E0ABJ331 Datasheet - Page 2
![RES ARRAY 330 OHM 4TERM 2RES SMD](/photos/9/67/96701/mnr12_sml.jpg)
MNR12E0ABJ331
Manufacturer Part Number
MNR12E0ABJ331
Description
RES ARRAY 330 OHM 4TERM 2RES SMD
Manufacturer
Rohm Semiconductor
Series
MNR12r
Datasheet
1.MNR12E0ABJ154.pdf
(5 pages)
Specifications of MNR12E0ABJ331
Resistance (ohms)
330
Number Of Resistors
2
Circuit Type
Isolated
Temperature Coefficient
±200ppm/°C
Tolerance
±5%
Power Per Element
62.5mW
Number Of Pins
4
Package / Case
0606 (1616 Metric), Convex
Size / Dimension
0.063" L x 0.063" W (1.60mm x 1.60mm)
Height
0.020" (0.50mm)
Mounting Type
Surface Mount
Operating Temperature
-55°C ~ 125°C
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
MNR12331TR
Resistors
•Before using components in circuits where they will be exposed to transients such as pulse loads (short-duration, high-level loads), be certain to evaluate the
Jumper type
Resistance
Rated current
Operating temperature
component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that
is greater than its rated voltage.
Characteristics
Resistance
Variation of resistance
with temperature
Overload
Solderability
Resistance to
soldering heat
Rapid change of
temperature
Damp heat, steady state
Endurance at 70°C
Endurance
Resistance to solvent
Bend strength of
the end face plating
Item
−55°C to +125°C
Max. 50mΩ
1A
J : ±5%
F : ±1%
± (2.0%+0.1Ω)
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
± (3.0%+0.1Ω)
± (3.0%+0.1Ω)
± (3.0%+0.1Ω)
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
No remarkable abnormality on the appearance.
Without mechanical damage such as breaks.
Resistor type
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
Resistance tolerance
Table 1
Guaranteed value
J (±5%)
F (±1%)
See Table.1
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
Jumper type
10 to 1M (E24)
10 to 1M (E24)
Resistance range
(Ω)
JIS C 5201-1 4.5
JIS C 5201-1 4.8
Measurement : −55 / +25 / +125°C
JIS C 5201-1 4.13
Rated voltage (current) ×2.5, 2s.
Maximum Overload Voltage : 100V
JIS C 5201-1 4.17
Rosin·Ethanol (25%WT)
Soldering condition : 235±5°C
Duration of immersion : 2.0±0.5s.
JIS C 5201-1 4.18
Soldering condition : 260±5°C
Duration of immersion : 10±1s.
JIS C 5201-1 4.19
Test temp. : −55°C to +125°C 5cyc
JIS C 5201-1 4.24
40°C, 93%RH
Test time : 1,000h to 1,048h
JIS C 5201-1 4.25.1
Rated voltage (current), 70°C
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
JIS C 5201-1 4.25.3
125°C
Test time : 1,000h to 1,048h
JIS C 5201-1 4.29
23±5°C, Immersion cleaning, 5±0.5min.
Solvent : 2-propanol
JIS C 5201-1 4.33
Test conditions (JIS C 5201-1)
Resistance temperature coefficient
(ppm / °C)
±200
±100
Rev.H
MNR12
2/4