HL10006Z3R000JJ Vishay, HL10006Z3R000JJ Datasheet - Page 4

• Manufacturer Part Number: HL10006Z3R000JJ
• Description: RES 3.0 OHM 5% 100W TUBULAR WW
• Manufacturer: Vishay
• Series: HLr

Specifications of HL10006Z3R000JJ

• Resistance (ohms): 3
• Power (watts): 100W
• Composition: Wirewound
• Temperature Coefficient: ±50ppm/°C
• Tolerance: ±5%
• Coating, Housing Type: Silicon Coated
• Mounting Feature: Brackets (not included)
• Size / Dimension: 0.750" Dia x 6.500" L (19.05mm x 165.10mm)
• Lead Style: Solder Lugs
• Package / Case: Radial, Tubular
• Resistance: 3 Ohms
• Power Rating: 100 Watts
• Operating Temperature Range: - 55 C to + 350 C
• Dimensions: 23.02 mm Dia. x 165.1 mm L
• Product: Power Resistors Wire Wound Silicon Coated
• Resistance Tolerance: ± 5%
• Resistor Element Material: Wirewound
• Resistor Case Style: Radial Lugs
• No. Of Pins: 2
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant
• Other names: HLC-3.0

MATERIAL SPECIFICATIONS
Element: Copper-nickel alloy of nickel-chrome alloy,
depending on resistance value
Core: Ceramic, steatite
Coating: Special high temperature silicone
Standard Terminals: Model “Z” terminals are tinned steel
Terminal Bands: Steel
Part Marking: DALE, Model, Wattage, Value, Tolerance,
Date Code
Document Number: 30208
Revision: 13-Jul-07
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Storage
High Temperature Exposure
Moisture Resistance
Shock, Specified Pulse
Vibration, High Frequency
Load Life
Industrial Power, Tubular (HL), Non-Inductive Tubular (NHL)
Derating
Rated power applied until thermally stable,
then a minimum of 15 minutes at - 55 °C
10 x rated power for 5 seconds
1000 V
- 55 °C for 24 hours
250 hours at + 350 °C
MIL-STD-202 Method 106, 7b not applicable
MIL-STD-202 Method 213, 100 g's for 6 milliseconds, 10 shocks
Frequency varied 10 to 2000 Hz, 20 g peak, 2 directions 6 hours each
1000 hours at rated power, + 25 °C, 1.5 hours “ON”, 0.5 hours “OFF”
120
100
For technical questions, contact: [e-mail]
80
60
40
20
- 65 - 50
0
rms
, 1 minute
Wirewound Resistors
0
25
50
CONDITIONS OF TEST
150
AMBIENT TEMPERATURE IN
NHL NON-INDUCTIVE
Models of equivalent physical and electrical specifications
are available with non-inductive (Aryton-Perry) winding.They
are identified by adding the letter N to the front of the HL
type designation (NHL-225 for example). For NHL models
maximum resistance values are lower, see STANDARD
ELECTRICAL SPECIFICATIONS table.
250
°
350
C
± (2.0 % + 0.05 Ω) ΔR
± (2.0 % + 0.05 Ω) ΔR
± (0.1 % + 0.05 Ω) ΔR
± (2.0 % + 0.05 Ω) ΔR
± (2.0 % + 0.05 Ω) ΔR
± (2.0 % + 0.05 Ω) ΔR
± (0.2 % + 0.05 Ω) ΔR
± (0.2 % + 0.05 Ω) ΔR
± (3.0 % + 0.05 Ω) ΔR
Vishay Dale
TEST LIMITS
HL, NHL
www.vishay.com
73