TQ2SA-L2-5V Panasonic Electric Works, TQ2SA-L2-5V Datasheet - Page 5

• Manufacturer Part Number: TQ2SA-L2-5V
• Description: RELAY LATCH LOPRO 2A 5VDC SMD
• Manufacturer: Panasonic Electric Works
• Series: TQ-SMDr
• Type: General Purpose Relayr

Specifications of TQ2SA-L2-5V

• Relay Type: Telecom
• Circuit: DPDT (2 Form C)
• Contact Rating @ Voltage: 2A @ 30VDC
• Coil Type: Latching, Dual Coil
• Coil Current: 28.1mA
• Coil Voltage: 5VDC
• Control On Voltage (max): 3.75 VDC
• Mounting Type: Surface Mount
• Termination Style: Gull Wing
• Brand/series: TQ Series
• Contact Form: DPDT
• Current, Rating: 0.5⁄2 AAC⁄ADC
• Dielectric Rating: 1,000 M≠ (at 500 V DC)
• Dimensions: 0.551 in. L x 0.354 in. W x 0.220 in. H
• Function: Latching
• Latch Type: 2 Coil
• Material, Contact: Gold-Clad Silver Alloy
• Number Of Pins: 10
• Standards: UL, CSA
• Temperature, Operating, Maximum: 85 °C
• Temperature, Operating, Minimum: -40 °C
• Termination: Surface Mount
• Voltage, Control: 5 VDC
• Voltage, Rating: 125 VAC
• Surge Withstand Between Contacts And Coil: 2,500 V
• Relay Construction: Latching Double Coil
• Contact Arrangement: DPDT
• Coil Voltage Dc: 5V
• Voltage Rating (vdc): 220V
• Voltage Rating (vac): 125V
• Coil Resistance: 178Ohm
• Pick-up Voltage (max): 3.75VDC
• Maximum Power Rating: 60W/62.5VA
• Operate Time: 4ms
• Contact Current Rating: 2A
• Contact Material: Silver Nickel/Gold Clad
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 5.6mm
• Product Depth (mm): 11.5mm
• Product Length (mm): 14mm
• Operating Temp Range: -40C to 85C
• Pin Count: 10
• Mounting Style: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Control Off Voltage (min): -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device
• Other names: 255-1775; 255-1775-5; 255-1775

TQ
[M.B.B. type]
*Pulse drive (JIS C 5442-1986)
2. Specifications
Notes: *1 AC is standard (B.B.M) type only.
1. Coil data
1) Single side stable
5
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Characteristics
Nominal coil
Nominal coil
Surface-mount terminal
4.5V DC
1.5V DC
4.5V DC
12V DC
24V DC
12V DC
24V DC
48V DC
voltage
voltage
3V DC
5V DC
6V DC
9V DC
3V DC
5V DC
6V DC
9V DC
*2 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
*3 Refer to “6. Usage, Storage and Transport Conditions” in
actual load. (SX relays are available for low level load switching [10V DC, 10mA max. level])
Arrangement
Initial contact resistance, max.
Contact material
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*
Nominal
operating power
Insulation resistance (Initial)
Breakdown
voltage (Initial)
Temperature rise (at 20°C 68°F)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Shock
resistance
Vibration
resistance
Mechanical (at 180 cpm)
Electrical (at 20 cpm)
Conditions for operation, transport and
storage*
Max. operating speed (at rated load)
nominal voltage*
nominal voltage*
80%V or less of
75%V or less of
Pick-up voltage
Pick-up voltage
(at 20°C 68°F)
(at 20°C 68°F)
(Initial)
(Initial)
3
Single side stable
1 coil latching
2 coil latching
Between open contacts
Between contact and coil
Between contact sets
Functional
Destructive
Functional
Destructive
Item
10%V or more of
10%V or more of
Drop-out voltage
nominal voltage*
Drop-out voltage
nominal voltage*
(at 20°C 68°F)
(at 20°C 68°F)
(Initial)
(Initial)
2
Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
AMBIENT ENVIRONMENT section in Relay Technical
Standard (B.B.M) type: 140 mW (3 to 12 V DC),
[±10%] (at 20°C 68°F)
100 mW (3 to 12 V DC), 150 mW (24 V DC)
200 mW (3 to 12 V DC), 300 mW (24 V DC)
Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Standard (B.B.M) type: Min. 2×10
Nominal operating
Nominal operating
200 mW (24 V DC), 300 mW (48 V DC)
(at 20°C 68°F)
66.7mA
44.4mA
33.3mA
22.2mA
16.7mA
93.8mA
46.7mA
28.1mA
23.3mA
15.5mA
11.7mA
current
current
8.3mA
8.3mA
6.3mA
40mA
2 Form C, 2 Form D (M.B.B.)
31mA
Min. 490 m/s
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 1.5 g
M.B.B. type: 200 mW
Standard (B.B.M) type: 750 Vrms for 1min. (Detection current: 10 mA),
Measurement at same location as “Initial breakdown voltage” section.
10 to 55 Hz at double amplitude of 3 mm (Detection time: 10μs.)
M.B.B. type: 300 Vrms for 1 min. (Detection current: 10 mA)
Ambient temperature: –40°C to +70°C
Ambient temperature: –40°C to +50°C
Standard (B.B.M) type: Min. 10
Min. 980 m/s
2
1,000 Vrms for 1min. (Detection current: 10 mA)
1,000 Vrms for 1min. (Detection current: 10 mA)
1 A 30 V DC, 0.5 A 125 V AC*
[±10%] (at 20°C 68°F)
[±10%] (at 20°C 68°F)
(Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
.053 oz
M.B.B. type: Min. 10
30 W (DC), 62.5 V A (AC)*
Max. 50mΩ (By voltage drop 6 V DC 1A)
10 to 55 Hz at double amplitude of 5 mm
Coil resistance
Coil resistance
2,880Ω
1,028Ω
2,880Ω
7,680Ω
64.3Ω
101Ω
125Ω
180Ω
405Ω
720Ω
145Ω
178Ω
257Ω
579Ω
45Ω
Min. 1,000MΩ (at 500V DC)
16Ω
5
2
(1 A 30 V DC resistive), Min. 10
(Half-wave pulse of sine wave: 6 ms.)
Standard (B.B.M) type:
110 V DC, 125 V AC*
10μA 10mV DC
(without diode)
Specifications
M.B.B. type:
Ag+Au clad
20 cpm
5
1 A
(1 A 30 V DC resistive)
8
280 mW (3 to 24 V DC), 400 mW (48 V DC)
Nominal operating
, M.B.B. type: Min. 10
Information.
Nominal operating
1
(resistive load)
1
(resistive load)
200mW
140mW
200mW
300mW
1
power
power
–40°F to
–40°F to
Approx. 3 g
ds_61020_en_tq: 010709J
5
+158°F;
+122°F;
(0.5 A 125 V AC resistive)
4 Form C
200 mW
400 mW
7
.106 oz.
Max. applied voltage
Max. applied voltage
nominal voltage
nominal voltage
nominal voltage
(at 20°C 68°F)
(at 20°C 68°F)
150%V of
150%V of
120%V of