FS-925 Digi International, FS-925 Datasheet - Page 40
![no-image](/images/manufacturer_photos/0/1/193/digi_international_sml.jpg)
FS-925
Manufacturer Part Number
FS-925
Description
JTAG-BOOSTER FOR 386EX 5V
Manufacturer
Digi International
Series
Digi/FS Forthr
Type
FLASHr
Datasheet
1.FS-977.pdf
(56 pages)
Specifications of FS-925
Contents
Programmer and Associated Interface Software
For Use With/related Products
Intel 386EX, 5V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
JTAG-Booster for Intel 386EX
/LENGTH=hhhhhh
The number of programmed bytes may be limited to LENGTH. If no LENGTH is
specified the whole file is programmed.
Abbreviation:
/L=
/NODUMP
In case of a verify error the contents of the I²C-Device is written to a file with the
extension .DMP. With option /NODUMP you can suppress this feature.
/I2CCLK=pin_name
Specifies the CPU pin used for serial clock output.
/I2CDAT=pin_name
Specifies the CPU pin used for serial data input and output. Pin_name must
specify a bidirectional pin otherwise an error message occurs. Instead of one
bidirectional pin one pin for serial data input and one for serial data output may
be used. See option /I2CDATO= and /I2CDATI= .
/I2CDATO=pin_name
Specifies the CPU pin used for serial data output. Pin_name must specify a
output pin otherwise an error message occurs.
/I2CDATI=pin_name
Specifies the CPU pin used for serial data input. Pin_name must specify a input
pin otherwise an error message occurs.
Example:
JTAG386 /PI2C EEPROM.CFG /I2CCLK=GP26 /I2CDAT=GP27
This example loads the file EEPROM.CFG to a serial EEPROM connected to the
pins GP26 and GP27 of the Intel 386EX.
40
JTAG_386EXa.doc