DV007004 Microchip Technology, DV007004 Datasheet - Page 91

• Manufacturer Part Number: DV007004
• Description: PROGRAMMER UNIVERSAL PM3
• Manufacturer: Microchip Technology
• Series: MPLAB&reg PM3r
• Type: Universalr

Specifications of DV007004

• Contents: MPLAB PM3 Programming Unit, Cables, Power Supply and IDE
• Positions/sockets: 1
• Ic Product Type: Programmer, Universal
• Supported Families: PICmicro, DsPIC30F
• Kit Contents: LCD, ICSP Support, 40-pin Socket, Digital/Multimedia Card Slot
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Microchip's PICmicro devices including dsPIC30F
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: PICmicro And DsPIC30F DSC Devices
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

© 2006 Microchip Technology Inc.
8.5.3.7.2
These options will be available only if the selected device supports ICSP.
1. ICSP Power Source – MPLAB PM3 displays the current ICSP power source and
2. ICSP Programming Mode – MPLAB PM3 displays the current ICSP program
8.5.3.7.3
This option enables you to adjust the V
and V
Each option displays the current setting and enables you to select “Up” or “Down”.
Each time you press <Enter> the voltage setting is adjusted up or down by 0.125.
8.5.3.7.4
To reset the voltages, select All Functions>Settings>Reset Voltages and press
<Enter>. This command resets the voltages to the default voltages.
8.5.3.7.5
To reset all the program statistics, select All Functions>Settings>Reset Statistics Count
and press <Enter>. This command will reset the counters to zero.
8.5.3.7.6
Safe mode was designed to prevent operational errors during production. When in Safe
mode, the only functions that are allowed are Program and Verify. If any other buttons
are pressed, a message is displayed stating that the system is in Safe mode and the
operation is not allowed. Requesting other functions in MPLAB IDE when MPLAB PM3
is connected to the PC will deactivate Safe mode.
To enter Safe mode, select All Functions>Settings>Safe Mode and press <Enter>. In
Safe mode, only Program and Verify options on the Command menu are available.
After Safe mode is implemented, you will be sent to the Command menu.
provides two options:
• Power from MPLAB PM3 – programming the device will be powered
• Target has own supply – programming the device will be powered from
mode voltage criteria and provides two options:
• MCLR High Voltage – utilizes MCLR high voltage for programming the
• PGM Pin (LVP) – utilizes the low voltage programming pin for program-
DD
through MPLAB PM3.
the target’s own power supply.
device.
ming the device.
Max, V
ICSP Settings
Adjust Voltages
Reset Voltages
Reset Statistics Count
Safe Mode
DD
Min, V
DD
Nominal and V
DD
nominal, V
PP
for an EEPROM device.
DD
A
PP
and
V
PP
for a Flash device
DS51464C-page 85