HS7727KCI02H Renesas Electronics America, HS7727KCI02H Datasheet - Page 206

• Manufacturer Part Number: HS7727KCI02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7727KCI02H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

6.2
Figure 6.2 shows the pin arrangement of the Hitachi-UDI port connector (14 pins).
Notes: 1. Handling of the TCK, TMS, TDI, TDO, /TRST, and /ASEBRKAK pins depends
186
differs from that of the connector manufacturer.
Pin 1 mark
2. The /RESETP signal in the user side is input to the 220 pin of the SH7727.
Figure 6.2 Pin Arrangement of the Hitachi-UDI Port Connector (14 Pins)
Pin Arrangement of the Hitachi-UDI Port Connector
Note that the pin number assignment of the Hitachi-UDI
Pin 1 mark
on the use conditions of the Hitachi-UDI as follows:
(a) When the user system is used by connecting the emulator, the TCK, TMS,
(b) When the user system is independently used without using the emulator and
Connect this pin to the Hitachi-UDI port connector as the output from the user
system.
TDI, TDO, /TRST, and /ASEBRKAK pins must be pulled up by a resistance
of several kilo-ohms. The ASEMD0 pin must be grounded.
Hitachi-UDI, the TCK, TMS, TDI, TDO, /TRST, and /ASEBRKAK pins must
be pulled up by a resistance of several kilo-ohms. The ASEMD0 pin also must
be pulled up by a resistance of several kilo-ohms.
(2.54)
6 x 2.54 = 15.24
Top view
25.0
23.0
Hitachi-UDI
port connector
0.45
CAUTION
Notes:
1. Input to or output from the user system.
2. The slash (/) means that the signal is low-active.
3. The emulator monitors the GND signal of the user
Pin No.
1
2*
3
4*
5
6
7*
11
8 to 10
and 13
14*
system and detects whether or not the user system
is connected.
2
2
2
3
TCK
/TRST
TDO
/ASEBRKAK
TMS
TDI
/RESETP
Not
connected
GND
GND
Signal
Input
Input
Output
Output
Input
Input
Output
Input/
Output*
Output
1
SH7727
Pin No.
164
160
143
151
162
163
220