M5282LITEKIT Freescale Semiconductor, M5282LITEKIT Datasheet - Page 2

• Manufacturer Part Number: M5282LITEKIT
• Description: BOARD EVALUATION KIT FOR MCF5282
• Manufacturer: Freescale Semiconductor

Specifications of M5282LITEKIT

• Processor To Be Evaluated: MCF528x
• Interface Type: RS-232, Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Freescale Semiconductor, Inc.
M5282LITEKIT
Data Sheet
The M5282LITE is provided operating the Motorola dBUG monitor for the MCF5282.
The ROM monitor/debugger dBUG, offers an intuitive command line interface that can
be used to download and execute code. It contains the primary features needed to
create a useful debugging environment. The dBUG firmware is stored in the lower 256K
bytes of the external Flash Memory device.
The user interface to dBUG is the M5282LITE COM1 serial port. The monitor provides
communication with a serial terminal or PC host for commands. Ethernet TFTP
downloads are also supported by the monitor.
MCF5282 applications can be loaded and execution supervised using the dBUG
monitor. Tested software may then be located and programmed into the MCF5282
internal flash memory for dedicated user application operation of the board. A single
option jumper (EX_BOOT) allows for control to be returned to the monitor if needed.
User may also use the external flash memory in their application but should reserve the
lower 256K bytes of the flash memory to maintain the dBUG monitor.
Development using the BDM / JTAG interface can be performed without restrictions.
The BDM cable included in the kit requires a 25 pin printer / LPT port and can be used
with the GNU debugger from the kit’s CD.
The support CD contains sample applications using the RTXC Quadros Single Stack
LITE real-time operating system and the OpenTCP network stack.
The sample
applications can be modified and rebuilt using the GNU development tools installed
from the CD.
The GNU tools allow development and debugging of C, C++, and
assembly code via the BDM cable included in the kit. Also on the CD are device data
sheets, user manuals, and several utility programs. The kit is plug and play out of the
box with a wall adapter power supply and necessary cables. A personal computer with
a serial COM port, a printer / LPT port, and Windows® 98SE/ME/NT/2000/XP are the
minimum system requirements to perform application development.
M5282LITE OPTION SUMMARY:
RCON_EN – 2 pin option jumper, enables external default Reset configuration.
EXT_BOOT – 2 pin option jumper, enables Reset program startup from the external
flash memory. Normally the dBUG monitor.
FLSH_EN – 2 pin option jumper, enables the external flash memory to reside on the
CS0 chip select.
BDM_EN – 2 pin option jumper, enables BDM mode for the BDM / JTAG development
port.
JP1 – 3 pin option jumper, selects standard or special operating mode of the
development port.
JP2 – 2 pin option jumper, enables Ethernet PHY interrupt on MCF5282 IRQ6.
RTS and CTS OPTION PADS – Provide enabling of hardware flow controls on the
COM1 port.
2
For More Information On This Product,
Go to: www.freescale.com