ZGP323ICE02ZEM Zilog, ZGP323ICE02ZEM Datasheet - Page 7
![EMULATOR ICE Z8 GP ZGP323](/photos/9/30/93049/zgp323ice02zem_sml.jpg)
ZGP323ICE02ZEM
Manufacturer Part Number
ZGP323ICE02ZEM
Description
EMULATOR ICE Z8 GP ZGP323
Manufacturer
Zilog
Series
Z8 OTPr
Type
In-Circuit Emulator Systemr
Specifications of ZGP323ICE02ZEM
Contents
Emulator Board, Cables, Software and Documentation
Processor To Be Evaluated
ZGP323
Interface Type
RS-232, Ethernet, USB
For Use With/related Products
ZGP323
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
269-3864
Setting Up Ethernet Communications
The default IP address and subnet mask of the Z8 GP ICE are 192.168.1.50 and
255.255.255.0, respectively. To enable communication between the PC running ZDSII and
the Z8 GP ICE, you must either change the PC’s Ethernet settings to match those of the Z8
GP ICE or vice versa.
If using the PC in a stand-alone configuration, set the PC’s IP address to 192.168.1.21 and
its subnet mask to 255.255.255.0. See “Changing the PC’s Settings to Match the Z8 GP
ICE” on page 7.
In a networked environment, set the Z8 GP ICE IP address and subnet mask to match the
network setup. See “Changing Z8 GP ICE Settings to Match the PC” on page 11.
Changing the PC’s Settings to Match the Z8 GP ICE
After completing the following steps to change the PC’s Ethernet settings, proceed to
ning a Sample Project
1. Open the Windows Control Panel and double-click the
UM019302-0407
Note:
Connection
The following instructions are for MS Windows XP. If your Windows operat-
ing system is different, refer to your MS Windows OS online help for details.
s icon. The
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform
on page 14.
Network Connections
dialog box appears (see Figure 6).
Network and Internet
Configure the Hardware
User Manual
Page 7
Run-