ZLP128ICE01ZEM Zilog, ZLP128ICE01ZEM Datasheet - Page 22

• Manufacturer Part Number: ZLP128ICE01ZEM
• Description: EMULATOR CRIMZON Z8 ZLP12840
• Manufacturer: Zilog

Specifications of ZLP128ICE01ZEM

• Interface Type: RS-232, Ethernet, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3829

UM018408-0408
Caution:
Windows 2000/Windows 98SE
Follow the steps below to connect the Crimzon ICE to a host PC using
USB Connection for Windows 2000/Windows 98SE OS version:
1. Connect the Crimzon ICE to the host PC using the supplied USB
2. Connect a 5 V DC power supply to the Crimzon ICE. The 3.3 V DC
3. In the wizard, click Next.
4. Select Search for a suitable driver for my device (Recommended);
5. Select Specify a location, click Next.
6. Browse to one of the following driver directories:
7. Click Next.
8. Select the appropriate driver, and click Next.
9. Click Finish to complete the installation.
Ensure the target board is not powered ON.
cable. See
tion.
and 1.8 V DC power LEDs should illuminate, see
Contact Zilog
In Windows, the Found New Hardware wizard must activate auto-
matically.
click Next.
<ZDS II Installation Directory>\device drivers\USB
<ZDS II Installation CD>\Device Drivers\USB
Figure 11
®
support at
on page 16 for Crimzon ICE rear panel connec-
www.zilog.com
Crimzon
if there is any problem.
®
In-Circuit Emulator
Figure 5
User Manual
Introduction
on page 8.
18