ZGP32300200ZPR Zilog, ZGP32300200ZPR Datasheet - Page 6

• Manufacturer Part Number: ZGP32300200ZPR
• Description: PROGRAMMER Z8 GP ZGP323 W/USB
• Manufacturer: Zilog
• Series: Z8 GP™r
• Type: USBr

Specifications of ZGP32300200ZPR

• Contents: Programmer, Power Supply, Cable(s) and Software
• For Use With/related Products: Z8 GP ZGP323
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3737

Page 6
Z8 GP™ ZGP323 Programming System
User Manual
4. In the
5. Open
6. In the
7. In the
8. Set the
9. In the
10. Click
11. When asked to rebuild affected files, click
12. To debug the program using the simulator, open the
13. Now that the program is complete, we’re going to create a hex file you can download
14. In ZDSII, open the
15. In the
16. Rebuild the project. Open the
17. Browse to the
18. Connect the Z8 GP ZGP323 programming system to your development PC as de-
19. Open
Using ZDS II to Burn a Hex File into a ZGP323 OTP Chip
stored. By default, ZDSII stores your files in the same directory as the project files.
build later by pressing F7.)
The Build Output Window at the bottom of ZDSII provides status messages about the
rebuild’s progress.
then
pletely debug the program before downloading to the chip. Select
Stop Debugging
into a ZGP323 chip installed on the Programing System.
\samples\ZGP323_ledBlink\ledblink_c\src
the file
lease configuration.
scribed in “Installing the USB Interface Driver and Cable” on page 3.
The
Project Settings
Reset
Project –> Settings
OK
Project > Settings
Select Configuration
General
General
Debugger
Select Configuration
Output Files Directory:
ledblink_c.hex
.
to load the simulator with the program code. The simulator is used to com-
c:\Program Files\ZDSII_Z8GP_<version>
tab, verify the
tab, set the
when you have finished debugging.
tab, make sure the
Build
window appears.
.
.
menu and select
CPU
, the hex file just created when you rebuilt the project in Re-
dialog, select
dialog, select
CPU Family
Build
to the directory in which you want your output files
field to
Driver:
menu and select
ZGP323XXX2832_Window
Debug
Release
Set Active Configuration
field is set to
Yes
field is set to
to rebuild the project. (You can also re-
and click
and click OK.
Build
Rebuild All
directory. There you will find
ZGP323
Simulator
menu and select
OK
.
.
.
Build > Debugger >
.
.
.
UM019101-0305
Debug
and