ZGP32300100ZPR Zilog, ZGP32300100ZPR Datasheet - Page 16

• Manufacturer Part Number: ZGP32300100ZPR
• Description: PROGRAMMING SYSTEM Z8 GP ZGP323
• Manufacturer: Zilog
• Series: Z8 GP™r
• Type: Ethernetr

Specifications of ZGP32300100ZPR

• Contents: Programmer, Power Supply, Cable(s) and Software
• Positions/sockets: 1
• Description/function: Z8 GP ZGP323 Programming Sytem
• For Use With/related Products: Z8 GP ZGP323
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3390

UM017403-0707
Note:
Stop any debugging process by selecting Build––>Debug––>Stop
Debugging.
16. Connect the Z8 GP ZGP323 programming system to your develop-
17. Select Project –> Settings to open the Project Settings window.
18. In the Debugger tab of the Project Settings window, select Ethernet
19. The Ethernet Driver dialog box appears. The IP Address field dis-
20. Click OK.
21. Select the appropriate package converter for your OTP chip.
22. Install the package converter into the ZIF socket on the OTP pro-
23. Install the OTP chip to be burnt into the package converter installed
24. Select Tools ––> OTP Programming to open the OTP window, see
ment PC as described in
Driver from the Driver drop-down menu and then click Configure
button.
plays the default IP address as 192.168.1.50. Enter the Z8 Program-
mer IP address if it has been modified. Leave the Port setting at 4040.
gramming module
in the OTP programming module ZIF socket. Match pin 1 of the chip
with pin 1 of the package converter ZIF socket.
Figure 6
on page 14.
Hardware Installation
Z8 GP™ ZGP323 Programming System
on page 2.
User Manual
Introduction
13