QV400D Quadravox Inc, QV400D Datasheet - Page 13

• Manufacturer Part Number: QV400D
• Description: CHIPCORDER PROTOTYPE TOOL KIT
• Manufacturer: Quadravox Inc
• Series: ChipCorder®r
• Type: Quadravox Prototyping Kitr

Specifications of QV400D

• Contents: Programmer Board with two empty ZIF Sockets, Cable, Power Supply, Software and Documentation
• For Use With/related Products: Winbond ChipCorder® Devices
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Quadravox
____________________________________________________________
____________________________________________________________
QV400D Board
Quadravox
ZIF Socket
ISD33000
- ISD4000
ZIF Socket
ISD1000
-ISD2500
The speech data created by the project software may be programmed into any ISD ChipCorder device
using the QV400D Programmer, which comes in the form of a pre-assembled printed circuit board
(PCB). Separate easy-to-use ZIF sockets are provided for the ISD1000-2500 and ISD33000-4000
devices.
In most PC systems, amplified speakers are connected to the sound card line output. The programmer
is interposed between the PC line out and amplified speakers. No other connections to the PC are
required. The QV400D is designed to pass both channels through when it is not in use, but this feature
will function only if the power supply remains connected.
The QV400D hardware installation is simple, but there are several points to be observed to obtain best
performance. For more information, see Installation and Troubleshooting
The Diagram and description below show the details of the hardware connections. All connectors and
jacks on the programmer board are marked on the PCB to facilitate proper connection.
ZIF Socket for ISD1000-ISD2500 series (S1, Marked “ISD1000-ISD2500” on the PCB)
ZIF Socket for ISD33000-ISD4000 series (S2, Marked “ISD33000-ISD4000” on PCB)
ISD1000, 1100, 1200, 1400 and 2500 series devices in 28/600 mil DIP packages must be plugged
in this ZIF socket for programming. Adapter boards QV400D-01 (ISD1500P), QV400D-02
(ISD1600P), QV400D-04 (ISD1100S-2500S) and QV400D-05 (ISD1000G, ISD2500G) must also be
plugged into this ZIF socket.
ISD33000 and ISD4000 series devices in 28/600 mil DIP packages must be plugged in this ZIF
socket for programming. Adapter boards QV400D-3A (ISD5008P), QV400D-3B (ISD5008S),
QV400D-06 (ISD33000S-4000S), QV400D-07 (ISD33000E-4000E) and QV400D-08 (ISD3300 or
ISD4000 based module) must also be plugged into this ZIF socket.
S2
S1
Pin 1
Pin 1
U2
Microcontroller
Chapter 3.
PIC
D3 Record
D2 Idle
Programmer Hardware
LED
LED.
D9 Power
LED
J1
J4 To Local
J3 To MM
J2 From
Sound
Card
Jack
Speaker
Speaker
Power