101-0398 Rabbit Semiconductor, 101-0398 Datasheet - Page 14

• Manufacturer Part Number: 101-0398
• Description: KIT DEV RABBIT2000/RCM2000
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Core Moduler

Specifications of 101-0398

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM2000
• Data Bus Width: 8 bit
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 4.75 V to 5.25 V
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1007

2. Connect RCM2000 to PC
Connect the 10-pin connector of the programming cable labeled
to header J3 on the
PROG
RCM2000 module as shown in Figure 4 below. Be sure to orient the red edge of the cable
towards pin 1 of the connector. (Do not use the
DIAG
connector, which is used for a normal
serial connection.)
not
Figure 4. RCM2000 Power and Programming Connections
3. Power Supply Connections
Hook up the connector from the wall transformer to header J5 on the Prototyping Board as
shown above. The orientation of this connector is not important since the VIN (positive)
voltage is the middle pin, and GND is available on both ends of the three-pin header J5.
Plug in the wall transformer. The power LED on the Prototyping Board should light up.
The RCM2000 and the Prototyping Board are now ready to be used.
NOTE: A RESET button is provided on the Prototyping Board to allow a hardware reset.
10
RabbitCore RCM2000