101-0401 Rabbit Semiconductor, 101-0401 Datasheet - Page 43

• Manufacturer Part Number: 101-0401
• Description: KIT DEV RABBIT2000/TCP/IP
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0401

• Rohs Status: RoHS non-compliant
• Contents: Rabbit 2000™ TCP/IP Development Board, Demo Board, Power Supply, Cable and Software
• Processor To Be Evaluated: Rabbit 2000
• Interface Type: RS-232, RS-485
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 101-0401; 316-1005; Q906133

4.7.2 How to Set Up your Computer’s IP Address for Direct Connect
When your computer is connected directly to the TCP/IP Development Board via an
Ethernet connection, you need to assign an IP address to your computer. To assign the PC
the address
Click on
ble-click the Network icon. Depending on which version of Windows you are using, look
for the
click on this line or select
up the TCP/IP properties dialog box. You can edit the IP address and the subnet mask
directly. (Disable “obtain an IP address automatically.”) You may want to write down the
existing values in case you have to restore them later. It is not necessary to edit the gate-
way address since the gateway is not used with direct connect.
Getting Started
TCP/IP Protocol
Start > Settings > Control Panel
10.10.6.101
Direct Connection PC to TCP/IP Development Board
IP 10.10.6.101
Netmask
255.255.255.0
/
Network > Dial-Up Connections
Properties
with the netmask
User’s PC
or
Local Area Connection > Properties
Ethernet
crossover
cable
to bring up the Control Panel, and then dou-
255.255.255.0
/
TCP/IP Dev
Board
Network
, do the following.
line or tab. Double-
to bring
39