DM300004-2 Microchip Technology, DM300004-2 Datasheet - Page 27

• Manufacturer Part Number: DM300004-2
• Description: BOARD DEMO DSPICDEM.NET 2
• Manufacturer: Microchip Technology
• Series: dsPIC™r
• Type: Microcontrollerr

Specifications of DM300004-2

• Contents: Board, Cables, CD, Power Supply
• Mcu Supported Families: DsPIC30F
• Supported Devices: DsPIC30F6014
• For Use With: PIC30F5013
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: CTR-21 PSTN, Ethernet NIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

 2004 Microchip Technology Inc.
FIGURE 2-13:
After building the code and setting the configuration bits, use the MPLAB ICD 2
debugger to program the device and run and debug the code on the dsPICDEM.net
Demonstration Board.
2.6.2
The MPLAB ICD 2 can be used to program and debug the dsPIC30F6014 device
in-circuit on the dsPICDEM.net board.
1. Connect the MPLAB ICD 2 to the PC with the USB cable (see Figure 2-14).
2. Connect the MPLAB ICD 2 to modular connector labeled ICD on the
3. Apply power to the board.
FIGURE 2-14:
USB Port
Note: Before proceeding, make sure that the USB driver for the MPLAB ICD 2 has
PC running MPLAB
dsPICDEM.net board with the provided short RJ-11cable.
Enabling the MPLAB ICD 2 Connection
been installed on your PC (see the MPLAB ICD 2 User’s Guide (DS51331)
for details regarding the installation of the USB driver).
Connect MPLAB
with provided RJ-11 cable
®
MPLAB ICD 2
CONFIGURATION SETTINGS
IDE
TUTORIAL DEMONSTRATION SETUP
Connect MPLAB
PC with USB cable
®
ICD 2 to board
®
ICD 2 to
ICD
J14
dsPICDEM.net™ Connectivity
Development Board
running Tutorial program
9 VDC
Apply power to the board
Power Cable
DS51471A-page 23
Tutorial
115 VAC