DM300004-1 Microchip Technology, DM300004-1 Datasheet - Page 44

• Manufacturer Part Number: DM300004-1
• Description: BOARD DEMO DSPICDEM.NET 1
• Manufacturer: Microchip Technology
• Series: dsPIC™r
• Type: Microcontrollerr

Specifications of DM300004-1

• Contents: *
• Mcu Supported Families: DsPIC30F
• Supported Devices: DsPIC30F6014
• For Use With: PIC30F5013
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: FCC/JATE PSTN, Ethernet NIC
• Lead Free Status / RoHS Status: na, Lead free / RoHS Compliant
• Other names: DM300004-1R; DM300004-1R

PICDEM.net™ 1 and dsPICDEM.net 2 Connectivity Dev Board User’s Guide
3.6
DS51471A-page 40
DEVICE CONFIGURATION AND PROGRAMMING
After you have built the code you must set up the configuration bits and then connect
the tool you plan to use for programming, running and debugging the code.
3.6.1
From the Configure menu select Configuration Bits to view the configuration bits and
set up the bits as shown in Figure 3-12. The settings that will most likely need to change
are:
FIGURE 3-12:
After building the code and setting the configuration bits, the MPLAB ICD 2 debugger
can be used to run and debug the code on the dsPICDEM.net Demonstration Board.
Follow the instructions in one of the next two sections depending on which tool you are
using.
3.6.2
The MPLAB ICD 2 can be used to program and debug the dsPIC30F6014 device
in-circuit on the dsPICDEM.net board.
1. Connect the MPLAB ICD 2 to the PC with the USB cable (see Figure 3-13).
2. Connect the MPLAB ICD 2 to modular connector labeled ICD on the
3. Apply power to the board.
Oscillator Source
Primary Oscillator Mode
Watchdog Timer
Comm Channel Select
Note: Before proceeding, make sure that the USB driver for the MPLAB ICD 2 has
Note: Before proceeding, make sure that the USB driver for the MPLAB ICD 2 has
dsPICDEM.net board with the provided short RJ-11 cable.
Set Up Device Configuration
Enabling the MPLAB ICD 2 Connection
been installed on your PC (see the MPLAB ICD 2 User’s Guide (DS51331)
for more details regarding the installation of the USB driver).
been installed on your PC (see the MPLAB ICD 2 User’s Guide (DS51331)
for details regarding the installation of the USB driver).
CONFIGURATION SETTINGS
Primary Oscillator
XT w/PLL 8x
Disabled
Use PGC/EMUC and PGD/EMUD
 2004 Microchip Technology Inc.