IE-789801-NS-EM1 Renesas Electronics America, IE-789801-NS-EM1 Datasheet - Page 22

• Manufacturer Part Number: IE-789801-NS-EM1
• Description: BD EMULATOR 78K0S UPD78980XCU/GB
• Manufacturer: Renesas Electronics America

Specifications of IE-789801-NS-EM1

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.2 Clock Settings
3.2.1 Overview of clock settings
(1) Clock that is already mounted on emulation board
(2) Clock that is mounted by user
(3) Pulse input from target system
board or (2) Clock that is mounted by user. For a clock oscillator, the target device is connected to a resonator
and the target device’s internal oscillator is used. An example of the external circuit is shown in part (a) of Figure 3-2.
During emulation, the oscillator that is mounted on the target system is not used. Instead, the clock that is mounted
on the emulation board which is installed for the IE-78K0S-NS or IE-78K0S-NS-A is used.
a clock signal is supplied from outside of the target device and the target device’s internal oscillator is not used. An
example of the external circuit is shown in part (b) of Figure 3-2.
20
The system clocks to be used during debugging can be selected from (1) to (3) below.
If the target system includes a clock oscillator, select either (1) Clock that is already mounted on emulation
If the target system includes an external clock, select (3) Pulse input from target system. For an external clock,
Caution The IE system will be hung-up if the system clock is not supplied normally. Moreover, be sure to
input a rectangular wave as the clock from the target. However, it is not necessary to supply a
clock to the X2 pin.
(a) Clock oscillator
Figure 3-2. External Circuits Used as System Clock Oscillator
X2
X1
V
Target device
SS
CHAPTER 3
User’s Manual U13390EJ2V0UM
INSTALLATION
External
clock
(b) External clock
X1
X2
Target device