IE-78044-R-EM Renesas Electronics America, IE-78044-R-EM Datasheet - Page 15

• Manufacturer Part Number: IE-78044-R-EM
• Description: BOARD EMULATOR 78K0 UPD7804X
• Manufacturer: Renesas Electronics America

Specifications of IE-78044-R-EM

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1.5 Emulation Probe
1.6 Notes on correct use of IE-78044-R-EM
The emulation probe is optional. Select the one best suited to your target device package.
(1) Be sure to turn off the power to IE-78000-R and the target system before connecting or disconnecting IE-78000-
(2) When emulating the target device by using IE-78044-R-EM and IE-78000-R, the target device operations slightly
(3) To input data through the external sense clip, maintain voltage at +15 V.
(4) To output data through the external sense clip, connect a pull-up resistor to the external sense clip on the target
(5) Be sure to connect the emulation probe ground clip to the target system signal ground line.
(6) Pins P8 and P12 cannot be traced as port pins.
(7) 5V must be supplied to the target system as V
R and the target system, and changing the setting of switches.
differ from those for the actual device. (Refer to CHAPTER 3 DIFFERENCES BETWEEN TARGET DEVICES.)
system, because the external sense clip has an open-collector output configuration.
EP-78024GF-R
(64-pin plastic QFP)
EP-78024CW-R
(64-pin shrink DIP)
EP-78130GF-R
(80-pin plastic QFP)
Table 1-2 Emulation Probe and Target Device
Emulation Probe
CHAPTER 1 GENERAL
DD
.
PD78P044
PD78042
PD78043
PD78044
Target Device
PD78P024
PD78023
PD78024
PD78042A
PD78043A
PD78044A
PD78045A
PD78P048A
5