HS2678REPI61H-U Renesas Electronics America, HS2678REPI61H-U Datasheet - Page 31

• Manufacturer Part Number: HS2678REPI61H-U
• Description: EMULATOR BASE UNIT H8S/2678R FAM
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS2678REPI61H-U

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: H8S/2678R
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

This section describes the diagnostic test procedure using the E6000 test program.
5.1
To execute the test program, use the following hardware; do not connect the user system interface
cable and user system.
1. Install the E6000 PC interface board in the host computer and connect the supplied PC
2. Connect the PC interface cable to the E6000.
3. Connect the supplied AC adapter to the E6000.
4. Initiate the host computer to make it enter DOS prompt command input wait state.
5. Turn on the E6000 switch.
E6000 (HS2678REPI61H)
Host computer
The E6000 PC interface board which will be one of the following boards or card:
Select one interface board from the following depending on the PC interface specifications.
ISA bus interface board (HS6000EII01H)
PCI bus interface board (HS6000EIC01H or HS6000EIC02H)
PCMCIA interface card (HS6000EIP01H)
LAN adapter (HS6000ELN01H)
interface cable to the board.
System Set-Up for Test Program Execution
Section 5 Diagnostic Test Procedure
13