M30850T2-CPE Renesas Electronics America, M30850T2-CPE Datasheet - Page 87

• Manufacturer Part Number: M30850T2-CPE
• Description: DEV M32C/80/84/85/86 COMPACT EMU
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30850T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M32C/84,85,86
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M30850T2-CPE User’s Manual
4.5 Notes on Using This Product
Notes on using this product are listed below. When debugging the MCU using this product, be careful about the following
precautions.
REJ10J0865-0300 Rev.3.00 December 16, 2005
Notes on the Self-check:
Note on Quitting the Emulator Debugger:
Notes on Clock Supply to the MCU:
Notes on Using the CPU Clock at Less than 16 MHz:
If the self-check does not result normally (excluding target status errors), the emulator may be damaged. Then
contact your local distributor.
Run the self-check with the user system not connected.
To restart the emulator debugger after it ends, always shut power to the emulator off once and then on again.
A clock supplied to the evaluation MCU is selected by the Emulator tab in the Init dialog box of the emulator
debugger.
When operating this product with a sub clock, be sure to set the SW2 and SW3 to XCIN and NC, respectively.
To use the CPU clock at less than 16 MHz, execute the command shown below in the Script Window after
starting the emulator debugger.
When you use the CPU clock at less than 1 MHz, contact your local distributor.
(1) When "Internal" is selected:
(2) When "External" is selected:
Once this command is executed, it remains effective the next time you start the emulator debugger. Therefore,
you do not need to execute this command again.
A clock generated by the oscillator circuit board in the M30850T2-CPE is supplied. It is continually
supplied regardless of the status of the user system clock and that of the user program execution.
A clock generated by the oscillator in the user system is supplied. It depends on the status of the oscillation
(on/off) of the user system.
[Command]
_settimeout 300, 300
IMPORTANT
4. Hardware Specifications
Page 85 of 98