HS7144KCI01H Renesas Electronics America, HS7144KCI01H Datasheet - Page 35

• Manufacturer Part Number: HS7144KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS7144KCI01H

• Contents: E10A-LITE, Cable and CD-ROM
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7144
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

Notes: 1. To connect the signals output from the Hitachi-UDI port connector, refer to the
2. To remove the user system interface cable from the user system, pull the tab on
3. The range of frequencies that the Hitachi-UDI operates at is different according
4. Connect the Hitachi-UDI signals from the Hitachi-UDI port connector directly to
5. When developing user systems, do not connect the TDI and TDO signals of the
GND line
Figure 2.4 Connecting the User System Interface Cable to the User System
device pin alignment.
the connector upward.
to the devices used. For details, refer to section 6.5.4, Notes on Using the JTAG
Clock (TCK).
the device.
device to the boundary scan loop, or separate them by using a switch (figure 2.5).
User system GND
connection
when the 14-pin Straight Type Connector is Used
User system interface cable
Pin 8
Pin 1
Hitachi-UDI port
connector
User system
Tab
13