CYCLONEMAX Freescale Semiconductor, CYCLONEMAX Datasheet - Page 9

• Manufacturer Part Number: CYCLONEMAX
• Description: CYCLONE MAX FLASH PROGRAM
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: FLASHr

Specifications of CYCLONEMAX

• Contents: Programmer/Debugger
• Positions/sockets: 1
• Description/function: Programmer, Debugger
• Silicon Family Name: MPC5xx
• Core Architecture: Coldfire, Power Architecture
• Core Sub-architecture: Coldfire V2, Power Architecture
• Rohs Compliant: Yes
• For Use With/related Products: MPC5xx / 55xx
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Cyclone MAX User Manual
At this stage you are simply configuring the Cyclone Max with the appropriate
data file and programming procedure. Actual programming of the target
hardware occurs later.
Once the information required in Areas 1-4 is complete, you may configure
the Cyclone Max by clicking the “ Store Image to Cyclone MAX” button. Figure
2-1 indicates that this will be performed over the USB Port, USB1, as
displayed in Area 4. You may also select the Serial port, or the Ethernet port if
it has been configured appropriately.
After the image has been saved to the Cyclone Max, you can program a
target by simply pressing the “ Start” button on the Cyclone Max. This will
begin the sequence that was specified in Area 3 (in this example: erase,
blank check, program, verify programmed data).
The complete functionality of the Cyclone MAX and its accompanying utilities
is beyond the scope of this Getting Started section. Please read further to
learn more about the full feature set and operation of the Cyclone MAX. For a
detailed description of the Cyclone MAX Configuration Utility, please refer to
Section 4 - STAND-ALONE PROGRAMMER CONFIGURATION .
(5) Displays the pinout configuration for the selected architecture.
(6) Allows the user to set the BDM Shift Frequency by selecting from the
(7) Allows the user to set the Reset Delay.
(8) The “ Store Image To Cyclone” button allows the user to store the
(9) The “ Store Image To Disk” button allows the user to store the current
port on the Cyclone MAX.
drop-down box.
current image on the Cyclone MAX.
image on their hard drive. The Manage Image Utility can be used to
configure the Cyclone with one or more images.
CYCLONE MAX
5