COP8-EMFLASH-00 National Semiconductor, COP8-EMFLASH-00 Datasheet - Page 9

• Manufacturer Part Number: COP8-EMFLASH-00
• Description: EMULATOR COP8FLASH
• Manufacturer: National Semiconductor
• Series: COP8™r
• Type: In-Circuit Emulator Systemr

Specifications of COP8-EMFLASH-00

• Contents: PCB, Cables, Null Target Board, Dev CD, Software and Power Supplies
• For Use With/related Products: COP8FLASH Families
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

the project directory so you will not have to repeat this step when this project directory is
used. After you have selected the emulation device, click OK to continue.
After the emulation device is selected, the Select Communication Port dialog box will
appear for you to select the Communications Port to which your COP8 WA is connected.
Note that this information will be saved in the project directory so you will not have to
repeat this step when this project directory is used. After the communication port is selected,
click OK to continue. The software will now establish communication with the COP8 WA.
If the PC has problems communicating with the emulator, then please review the
README.TXT file in the software installation directory.
Once communication has been established, the Configure Emulator dialog box will appear
where you can change the Baud Rate. From this dialog box you also have access to the
Flash Configuration Options dialog box via the Flash Configuration button. No changes
are required for this exercise so click Cancel to continue.
Figure 5.
Figure 6.
9