DV164121 Microchip Technology, DV164121 Datasheet - Page 12

• Manufacturer Part Number: DV164121
• Description: KIT PICKIT 2 DEBUG EXPRESS
• Manufacturer: Microchip Technology
• Series: PICkit™ 2r
• Type: Microcontrollerr

Specifications of DV164121

• Contents: Board, PICkit™ 2 Programmer, Cable, CD
• Processor To Be Evaluated: PIC family
• Data Bus Width: 8 bit, 16 bit, 32 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC Micro® MCU
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

DS51553E-page 8
The PICkit 2 unit is shown in Figure 1-1.
FIGURE 1-1:
1.3.1
The USB port connection is a USB mini-B connector. Connect the PICkit 2 to the PC using
the supplied USB cable.
1.3.2
The Status LEDs indicate the status of the PICkit 2.
1. Power (green) – Power is applied to the PICkit 2 via the USB port.
2. Target (yellow) – The PICkit 2 is powering the target device.
3. Busy (red) – The PICkit 2 is busy with a function in progress, such as
1.3.3
The push button may be used to initiate the Write Device programming function when
Programmer>Write on PICkit Button is checked on the PICkit 2 Programmer
application menu (see item labeled 2 in Figure 1-1.)
The push button may also be used to put the PICkit 2 unit operating system firmware
into Bootloader mode. For more information on this feature, see Chapter 6. “Updating
the PICkit 2 Operating System”.
1.3.4
The programming connector is a 6-pin header (0.100" spacing) that connects to the
target device. See the pinout specification in Figure 1-2.
For more information on how to use the PICkit 2 with In-Circuit Serial Programming
(ICSP), refer to Chapter 3. “Using In-Circuit Serial Programming™ (ICSP™)”.
Legend:
programming.
1 – Status LEDs
2 – Push Button
6
1
USB Port Connection
Status LEDs
Push Button
Programming Connector
5
PICkit™ 2 MCU PROGRAMMER/DEBUGGER
2
3 – Lanyard Connection
4 – USB Port Connection
3
5 – Pin 1 Marker
6 – Programming Connector
© 2008 Microchip Technology Inc.
4