100-3040 Bluetechnix, 100-3040 Datasheet - Page 26

• Manufacturer Part Number: 100-3040
• Description: KIT BLACKFIN STARTER CM-BF538
• Manufacturer: Bluetechnix
• Type: DSPr

Specifications of 100-3040

• Contents: Board, Module, Power Supply
• For Use With/related Products: ADSP-BF548 Blackfin® Processor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Blackfin DEV-BF548-Lite. DEV-BF548DA-lite Hardware User Manual
5.
6.
7.
This procedure has to be done twice, because at first the USB driver will be installed. Then the
Hardware Wizard opens again, because the UART bridge driver has to be installed in addition
using the same driver file. Simply repeat this step.
Open the Windows device manager (Control Panel  System  Hardware) to see which COM
port number has been assigned to the CP2101 UART-to-USB Chip. This number differs from
computer to computer based on the already installed COM ports. (e.g. COM4)
Open a Terminal program like the HyperTerminal included in Windows operating systems and
open the respective COM port with 115200 Baud, 8 Data-bits, No Parity and 1 Stop bit,
disable the Hardware flow control.
Reset the DEV-BF548-Lite Board (Press the main reset button). After this you will see the
BLACKSheep boot-screen showing up. If you disconnect the device, you have to reconnect.
25