M3A-2114G72 Renesas Electronics America, M3A-2114G72 Datasheet - Page 30

• Manufacturer Part Number: M3A-2114G72
• Description: DEV M32172/M32173 (MCU SOCKET) S
• Manufacturer: Renesas Electronics America
• Type: MCUr

Specifications of M3A-2114G72

• Contents: Board, Serial Cable, C Compiler, Debugger, Programmer and Documentation
• For Use With/related Products: M32172, M32173
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5
5.2 Hardware Setup when M3A-2114G52/ G62/ G72 in use
The following shows how to set M3A-2195.
For more details, refer to M3A-2195 User’s Manual.
Power to the M3A-2195 SDI Interface Board can be fed from either a 5V DC power supply (5 V) or a 12 DC power
supply (6-12 V). Use the included 5V or 12V power supply cables to connect M3A-2195 and a corresponding DC
power supply.
The method for connecting them is shown in Figure 5.2-1
In order to control the M3A-2195 SDI Interface Board from M3S-KD32R installed in the host PC, the host PC’s LPT
parallel port and the M3A-2195’s J1 connector should be connected with the parallel cable included in M3A-2195.
The method for connecting the host PC and M3A-2195 is shown in Figure 5.2-2.
5.2.1 M3A-2195 Power Supply Connection and Settings
5.2.2 Connecting to Host PC
Feeding from 12V DC ( 6 - 12V )
Feeding from 5V DC ( 4.5 - 5.5V )
When feeding from DC 12V(J3)
Jumper connector
M3A-2195
or
Figure 5.2-2 Connecting the M3A-2195 and Host PC
Figure 5.2-1 Feeding Power to M3A-2195
Parallel cable
3 JP1 1
Settings of JP1
3 JP1 1
When feeding from DC 5V(J4)
(set as default when shipped from
factory)
M3A-2195
Jumper connector
J3
J4
Connect to
the host PC’s
LPT parallel port.
M3A-2114 User’s Manual (28/68)
JP1
Hardware Setup