101-0679 Rabbit Semiconductor, 101-0679 Datasheet - Page 15

• Manufacturer Part Number: 101-0679
• Description: KIT DEV RABBIT RCM3600 INTL
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-0679

• Contents: RabbitCore Module, Dev. Board, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: Rabbit 3000
• Interface Type: RS-232
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 5 V
• For Use With/related Products: RCM3600
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

2.2.2 Connect Programming Cable
The programming cable connects the RCM3600 to the PC running Dynamic C to down-
load programs and to monitor the RCM3600 module during debugging.
Connect the 10-pin connector of the programming cable labeled
the RCM3600 as shown in Figure 3. Be sure to orient the marked (usually red) edge of the
cable towards pin 1 of the connector. (Do not use the
normal serial connection.)
Connect the other end of the programming cable to a COM port on your PC.
User’s Manual
NOTE: Be sure to use the programming cable (Part No. 101-0542) supplied with this
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
Development Kit—the programming cable has blue shrink wrap around the RS-232 con-
verter section located in the middle of the cable. Programming cables from other Rabbit
Semiconductor kits are not designed to work with RCM3600 modules.
an RS-232/USB converter (Part No. 540-0070) with the programming cable supplied
with the RCM3600 Development Kit. Note that not all RS-232/USB converters work
with Dynamic C.
Figure 3. Connect Programming Cable and Power Supply
DIAG
connector, which is used for a
PROG
to header J2 on
9