MCB2470 Keil, MCB2470 Datasheet
![BOARD EVAL NXP LPC247X SERIES](/photos/9/23/92384/mcb2470_sml.jpg)
MCB2470
Manufacturer Part Number
MCB2470
Description
BOARD EVAL NXP LPC247X SERIES
Manufacturer
Keil
Type
MCUr
Specifications of MCB2470
Contents
Board, Cable, CD
For Use With/related Products
LPC2478
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
This Quick Start Guide introduces the MCB2470 board
for the NXP (founded by Philips) LPC2478 device. It
shows how to install the ARM software development tools
and run a variety of example projects.
Installing the Software
In order to install the evaluation version of the MDK-ARM
If the opening screen does not appear, run SETUP from the
CD root directory
Note: The first MCB2470 boards shipped without a
CD-ROM. An evaluation version of MDK is available for
download from https://www.keil.com/demo/eval/arm.htm.
Blinky Example
This example demonstrates the ease of downloading and
debugging an application on a target board.
It can be found at:
To use this example
Microcontroller Development Kit from a CD-ROM
Insert the CD-ROM into your PC.
Click Install Evaluation Software, then ARM Compiler
(Eval Tools)
Follow the setup program instructions
Open the Blinky.uv2 project file
Compile and link the Blinky application
Program the application into on-chip Flash ROM
Start Vision
Project - Open
Project - Build
Flash - Download
C:\Keil\ARM\Boards\Keil\MCB2470\Blinky
Getting Started and Blinky Example
www.keil.com/mcb2470
Connecting to your Target
Power the target with the USB A to mini-B cable provided by
connecting your PC to the mini-USB connector on the board.
This USB connection may be used to program the LPC2478 on-
chip Flash serially with the utility Flash Magic.
The MCB2470 provides a number of standard interfaces such as
CAN, RS232, 10/100base-T Ethernet, USB OTG/Device and USB
Host. Use standard cables to connect the board’s interfaces to a
PC or other embedded systems.
Using ULINK2
your PC to the JTAG port of the target board, allowing you to
download and debug embedded programs running on your target
hardware.
The ULINK2 Adapter connects to the MCB2470 using the
20-pin ribbon cable.
ULINK2 supports the Keil Real-Time Agent for “on-the-fly” debug
of running applications via the JTAG port.
Using the debugger commands, you may:
The Keil ULINK2 JTAG-USB Adapter connects the USB port of
The LEDs on the target are controlled by the P0.25-AD0.2
potentiometer. As the setting increases, the LEDs scroll faster.
Start debug mode
Single step through code
Set breakpoints
Run the application
Review variables in the watch window
Reset the device to re-run the application
Use the yellow arrow (program counter) to view the
current assembler or C statement
Quick Start Guide
MCB2470
Related parts for MCB2470
MCB2470 Summary of contents
Page 1
... PC to the mini-USB connector on the board. This USB connection may be used to program the LPC2478 on- chip Flash serially with the utility Flash Magic. The MCB2470 provides a number of standard interfaces such as CAN, RS232, 10/100base-T Ethernet, USB OTG/Device and USB Host. Use standard cables to connect the board’s interfaces other embedded systems ...
Page 2
... SD/MMC flash memory card on the evaluation board. It can be downloaded from: http://www.keil.com/download/docs/380.asp To use this example: Connect the MCB2470 board’s UART RS232 port to the COM1 port on your PC via a serial cable and start a hyperterminal session configured for 115200 baud, 8 bits, no parity, 1 stop bit, XON/XOFF. ...