C8051F330DK Silicon Laboratories Inc, C8051F330DK Datasheet - Page 103

• Manufacturer Part Number: C8051F330DK
• Description: DEV KIT FOR C8051F330/F331
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F330DK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F33x
• Interface Type: RS-232
• Operating Supply Voltage: 7 V to 15 V
• Silicon Manufacturer: Silicon Labs
• Core Architecture: 8051
• Silicon Core Number: C8051F330
• Silicon Family Name: C8051F33x
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: Silicon Laboratories C8051F330, C8051F331
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1264

C8051F330/1/2/3/4/5
The level of Flash security depends on the Flash access method. The three Flash access methods that
can be restricted are reads, writes, and erases from the C2 debug interface, user firmware executing on
unlocked pages, and user firmware executing on locked pages. Table 11.2 summarizes the Flash security
features of the 'F330/1/2/3/4/5 devices.
106
Read, Write or Erase unlocked pages
(except page with Lock Byte)
Read, Write or Erase locked pages
(except page with Lock Byte)
Read or Write page containing Lock Byte
(if no pages are locked)
Read or Write page containing Lock Byte
(if any page is locked)
Read contents of Lock Byte
(if no pages are locked)
Read contents of Lock Byte
(if any page is locked)
Erase page containing Lock Byte
(if no pages are locked)
Erase page containing Lock Byte - Unlock all
pages (if any page is locked)
Lock additional pages
(change '1's to '0's in the Lock Byte)
Unlock individual pages
(change '0's to '1's in the Lock Byte)
Read, Write or Erase Reserved Area

C2 Device Erase - Erases all Flash pages including the page containing the Lock Byte.
Flash Error Reset - Not permitted; Causes Flash Error Device Reset (FERROR bit in RSTSRC is '1' after
reset).
- All prohibited operations that are performed via the C2 interface are ignored (do not cause device reset).
- Locking any Flash page also locks the page containing the Lock Byte.
- Once written to, the Lock Byte cannot be modified except by performing a C2 Device Erase.
- If user code writes to the Lock Byte, the Lock does not take effect until the next device reset.
Action
Table 11.2. Flash Security Summary
Rev. 1.7
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Erase Only
C2 Debug
C2 Device
Permitted
Permitted
Permitted
Permitted
Interface
an unlocked page
Flash Error Reset
Flash Error Reset
Flash Error Reset
Flash Error Reset Flash Error Reset
Flash Error Reset Flash Error Reset
Flash Error Reset Flash Error Reset
Flash Error Reset Flash Error Reset
Flash Error Reset Flash Error Reset
User Firmware executing from:
Permitted
Permitted
Permitted
a locked page
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted