STR710-EVAL STMicroelectronics, STR710-EVAL Datasheet - Page 8

• Manufacturer Part Number: STR710-EVAL
• Description: BOARD EVAL FOR STR71X SER MCU
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STR710-EVAL

• Contents: STR710 Evaluation Board, LCD, I2C EEPROM, 4MBytes EMI Flash and 4MBytes EMI SRAM
• Processor To Be Evaluated: STR710FZ2T6
• Data Bus Width: 32 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: ARM7TDMI
• Silicon Core Number: STR7
• Silicon Family Name: STR71x
• Kit Contents: Evaluation Board For STR71xF
• Rohs Compliant: NA
• For Use With/related Products: STR71x ARM7 Series
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 497-4516

2 Hardware
2.9
Caution:
2.10
2.11
2.12
7/27
CAN interface
A general purpose, asynchronous serial I/O data port connected through a 9-pin D-type male
connector with microswitch selectable low speed fault tolerant transceiver (L9669) or low or
high speed selectable transceiver (L9615 or L9616). See
page 13
The board schematic for the CAN interface detailed in
not a reference design and should not be copied. To design a CAN interface with the STR710
please refer to the “STR71x Hardware Development Getting Started Guide AN1775”.
RS232 serial interfaces
Two general purpose, asynchronous serial I/O data ports are connected through 9-pin D-type
male connectors refer to
RS232-A connects directly to UART0, transmit and receive only. RS232-B connects to either
UART1 or UART2 through switch 9, transmit and receive only.
RTS is shorted to CTS and DTR is shorted to DSR at the connector for both interfaces.
External analog
An external analog input connector is provided, see
and
Analog input
The analog input to ADC is demonstrated by the variable resistor R63. Although there is a
thermistor connected up to the analogue input AIN.1 in the schematics
EVAL board top level page 1 of 2 on page 15
the product.
Figure 11: STR710-EVAL board top level page 1 of 2 on page 15
.
Section 3.4: RS232 serial data connector on page 14
, it is not functional and has been removed from
Section 3.3: External analog on page 13
Figure 16: CAN interface on page 20
Section 3.2: CAN bus connector on
.
Figure 11: STR710-
STR710-EVAL
.
, is