101-1069 Rabbit Semiconductor, 101-1069 Datasheet - Page 17

• Manufacturer Part Number: 101-1069
• Description: KIT DEVELOPMENT RCM3305 US
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-1069

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3305
• Interface Type: Ethernet
• For Use With/related Products: RCM3305
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 316-1129

2.2.2 Step 2 — Connect Programming Cable
The programming cable connects the RCM3305 series module to the PC running
Dynamic C to download programs and to monitor the module during debugging.
2.2.2.1 RCM3309 and RCM3319
Connect the 10-pin connector of the programming cable labeled
to header J1 on
PROG
the RCM3309/RCM3319 as shown in Figure 3(a). There is a small dot on the circuit board
next to pin 1 of header J1. Be sure to orient the marked (usually red) edge of the cable
towards pin 1 of the connector. (Do not use the
DIAG
connector, which is used for a non-
programming serial connection.)
Figure 3(a). Connect Programming Cable and Power Supply
Connect the other end of the programming cable to an available USB port on your PC or
workstation. Your PC should recognize the new USB hardware, and the LEDs in the
shrink-wrapped area of the USB programming cable will flash.
User’s Manual
11