101-0587 Rabbit Semiconductor, 101-0587 Datasheet - Page 16

• Manufacturer Part Number: 101-0587
• Description: KIT DEV RABBITCORE/RCM3400
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-0587

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3400
• Data Bus Width: 8 bit
• Interface Type: Ethernet
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 2.8 V to 3.45 V
• For Use With/related Products: RCM3400
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1027

2.2.3 Connect Power
When all other connections have been made, you can connect power to the Prototyping Board.
Connect the wall transformer to jack J8 on the Prototyping Board as shown in Figure 3.
Plug in the wall transformer. The power LED on the Prototyping Board should light up. The
RCM3400 and the Prototyping Board are now ready to be used.
NOTE: A RESET button is provided on the Prototyping Board to allow a hardware reset
without disconnecting power.
2.2.3.1 Overseas Development Kits
Development kits sold outside North America include a header connector that may be con-
nected to 3-pin header J9 on the Prototyping Board. The connector may be attached either way
as long as it is not offset to one side. The red and black wires from the connector can then be
connected to the positive and negative connections on your power supply. The power supply
should deliver 8 V–24 V DC at 8 W.
10
RabbitCore RCM3400