STM3210B-EVAL STMicroelectronics, STM3210B-EVAL Datasheet - Page 30

• Manufacturer Part Number: STM3210B-EVAL
• Description: BOARD EVALUATION FOR STM32
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STM3210B-EVAL

• Contents: Fully Assembled Evaluation Board
• Processor To Be Evaluated: STM32F10x
• Data Bus Width: 32 bit
• Interface Type: USB
• Operating Supply Voltage: 5 V
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx
• For Use With/related Products: STM32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6048

Running the demonstration
Note:
2.4.3
30/57
Figure 29. Alarm Show submenu
To exit the Alarm Show submenu press the SEL push-button. To exit the Alarm Adjust
submenu, select the Return line and press the SEL push-button.
In the Alarm Adjust and Alarm Show menus, if the time and date have not yet been
configured, the message shown in
Low-power modes
The STM32F10xxx microcontroller provides different operating modes in which the power
consumption is reduced. The purpose of this menu is to show the behavior of the
microcontroller in different low-power modes. The Stop and Standby modes are taken as
examples.
Stop mode menu
This menu allows the user to put the STM32F10xxx in the Stop mode. The software
performs the specific instruction sequence needed to enter the Stop mode.
In this application, the STM32F10xxx can be made to exit the Stop mode in two ways as
shown in
Figure 30. Exiting the Stop mode
In the first case, The EXTI Key button is used to make the MCU exit the Stop mode.
Once the Stop mode submenu has been selected, the red LEDs continue blinking until
the "SEL" push-button is pressed, and the system enters the Stop mode. When the
MCU is in the Stop mode, the message shown in
Figure
30.
Doc ID 13534 Rev 5
Figure 28
is displayed on the LCD screen.
Figure 31
is displayed on the LCD.
UM0435