DM163022 Microchip Technology, DM163022 Datasheet - Page 38

• Manufacturer Part Number: DM163022
• Description: BOARD DEMO PICDEM-2 PLUS
• Manufacturer: Microchip Technology
• Type: MCUr

Specifications of DM163022

• Contents: Board, CD, Sample Part
• Processor To Be Evaluated: PIC 16 and PIC 18
• Interface Type: RS-232
• Silicon Manufacturer: Microchip
• Core Architecture: PIC
• Core Sub-architecture: PIC16, PIC18
• Silicon Core Number: PIC16F, PIC18F
• Silicon Family Name: PIC16F8xx, PIC18F4xxx
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PICDEM 2 Plus
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: DM163022R; DM163022R

MCP212X Developer’s Daughter Board User’s Guide
TABLE D-3:
DS51571A-page 34
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Step Action
Place both devices on a flat surface about 25 cm (10”)
apart, with the IR ports facing each other.
On the System #1 Unit:
The jumpers must be configured as in Figure D-3.
On the System #1 Unit:
Apply power to the unit via the 9V power supply.
On the System #1 Unit:
Connect the PC serial port cable that is connected to
COM1.
On the System #2 Unit:
Insert the MCP212X Developer’s Daughter Board into
the PICDEM™ HPC Explorer Demo Board.
Ensure that the jumpers are configured as in
Figure D-2.
On the System #2 Unit:
Apply power to the unit via the 9V power supply.
On the System #2 Unit:
Connect the PC serial port cable that is connected to
COM2.
On the System #1 Unit:
Depress and release Switch 2 (S2 – MCLR).
On the System #2 Unit:
Depress and release Switch 2 (S2 – MCLR).
On the PC:
Open the HyperTerminal
COM 1.
Ensure that the window indicates that the
HyperTerminal program is connected.
On the PC:
In the HyperTerminal program COM1 window, type
alpha-numeric characters (such as “123456 asdfg”).
On the PC:
In the HyperTerminal program COM2 window, depress
the Return key and type alpha-numeric characters
(such as “7890 hjkl;”).
On the System #2 Unit:
Power-down the board and remove the tested
MCP212x Daughter Board.
Go to Step #5
DEMO #1 STEPS
Table D-3 shows the steps for Demo #1 operation.
®
program window for
Result
—
—
On the System #1 Unit:
The green power LED (D) will turn on.
—
Test unit will echo the received Alpha character
(changing the case; upper to lower and lower to
upper).
On the System #2 Unit:
The green power LED (D) will turn on.
—
—
—
—
On the PC:
In the HyperTerminal program COM 2 window, the
same characters should be displayed (“123456
asdfg”).
On the PC:
In the HyperTerminal program COM 1 window, the
same characters should be displayed (“7890 hjkl;”) on
the line below the “123456 asdfg” characters.
—
—
© 2005 Microchip Technology Inc.