MCP6SX2DM-PCTLTH Microchip Technology, MCP6SX2DM-PCTLTH Datasheet - Page 20

• Manufacturer Part Number: MCP6SX2DM-PCTLTH
• Description: BOARD DEMO PICTAIL THERM MCP6SX2
• Manufacturer: Microchip Technology
• Series: PICtail™r

Specifications of MCP6SX2DM-PCTLTH

• Sensor Type: Thermistor
• Interface: Analog
• Voltage - Supply: 2.5 V ~ 5.5 V
• Embedded: No
• Utilized Ic / Part: MCP6S22, MCP6S92
• Processor To Be Evaluated: MCP6Sx2
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Sensitivity: -
• Sensing Range: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

MCP6SX2 PGA Thermistor PICtail™ Demo Board User’s Guide
DS51517B-page 16
3.2.8
The ADC is automatically setup by the PICkit 1 Signal Analysis PC program. The two
possible inputs are shown in Figure 3-5.
1. If in the Real Time Mode of operation (Strip Chart), select the Number of
2. Select the Sample Rate from the second pull-down list.
FIGURE 3-5:
The PICkit 1 Signal Analysis PC program allows the user to manually configure the
ADC.
1. Clicking the ADC button (see Figure 3-6) opens the ADC configuration window.
See the PIC16F684 data sheet (DS41202) for more information on configuring the
registers.
FIGURE 3-6:
Samples from the first pull-down list.
This window starts at the power-on default conditions for the ADC; therefore, it
must be configured before use.
1. Select Number of Samples
2. Select Sample Rate
Configure the ADC
Standard ADC Options.
Manual ADC Configuration.
Draft
2. ADC Window
© 2006 Microchip Technology Inc.
1. Select ADC window