OCB100-KIT TT Electronics/Optek Technology, OCB100-KIT Datasheet - Page 7

• Manufacturer Part Number: OCB100-KIT
• Description: KIT CALIBRATION CIRC OPTO ASSY
• Manufacturer: TT Electronics/Optek Technology

Specifications of OCB100-KIT

• Sensor Type: Opto Interrupter
• Voltage - Supply: 4.5 V ~ 5.5 V
• Embedded: No
• Utilized Ic / Part: OPB350C, OPB732CZ, OPB885CZ
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Sensitivity: -
• Sensing Range: -
• Other names: 365-1507

This switching position and light level may vary dependent on several
possible factors such as:
with an LED and Phototransistor such as:
POWERING UP THE OCB100CZ
mum regulated power supply.
battery holder such as P/N SBH331AS available from batteryholders.
com. Connect +5 volts to pin #1 of connector J1 (red wire of the
supplied mating connector) and ground to pin #6 of J1 (black wire of
the mating connector).
The OCB100 PCBoard can be wired directly to any optical device
The OCB100CZ should be powered by a 5.0V ± 0.5V, 50mA mini-
You can also use three 1.5V AA batteries connected in series in a
•
•
•
•
•
•
•
•
Ambient light variation (reduced or eliminated with periodic
recalibration)
LED and phototransistor pair degradation (eliminated with
periodic recalibration)
Contamination in front of either the LED or phototransistor
(reduced or eliminated with periodic cleaning)
System power variation (reduced or eliminated with periodic
recalibration)
Temperature changes (reduced or eliminated with periodic
recalibration)
Interruptive devices / slotted switches / interruptive encoders
Reflective devices / reflective switches / reflective encoders
Specialty devices / fluid sensors
OPTEK gives you the tools to help you take your ideas to market.
7