TMPSNS-RTD1 Microchip Technology, TMPSNS-RTD1 Datasheet - Page 13

• Manufacturer Part Number: TMPSNS-RTD1
• Description: BOARD EVAL PT100 RTD TEMP SENSOR
• Manufacturer: Microchip Technology

Specifications of TMPSNS-RTD1

• Sensor Type: Temperature
• Interface: USB
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP3301, MCP6S26, PIC18F2550
• Processor To Be Evaluated: MCP6S26, MCP3301, MCP6024, MCP41010, PIC18F2550, TC1071, MCP6002
• Data Bus Width: 12 bit
• Interface Type: USB
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Voltage - Supply: -
• Sensitivity: -
• Sensing Range: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Not applicable / Not applicable

© 2007 Microchip Technology Inc.
2.3.2
1. Once the USB connection is secure, start the PT100RTD ThermalManage-
FIGURE 2-3:
2. Select Enable/Disable for CH0 or CH1 (Channel 0 and Channel 1, respectively).
3. Select PGA gain, ADC sampling rate, and sampling buffer size for the
4. Use the scroll bar to adjust the differential amplifier gain and Remote or Local
5. Click start to start acquisition, stop to stop acquisition. Reset to Clear buffer.
6. Adjust the digital potentiometer positions to select the differential amplifier gain
7. Double-click the chart. The Chart Configuration window will be displayed.
ment.EXE file and select Enable Macro. When the software starts, the
Configuration window will be displayed, as shown in Figure 2-3.
stripchart display.
RTD bias currents.
and trim the current sources for the local and external RTDs.
Software Setup
PC Software GUI.
Installation and Operation
DS51607B-page 9