EK34 Cirrus Logic Inc, EK34 Datasheet - Page 2

• Manufacturer Part Number: EK34
• Description: EVALUATION KIT FOR PA240CX
• Manufacturer: Cirrus Logic Inc
• Series: Apex Precision Power™r

Specifications of EK34

• Channels Per Ic: 1 - Single
• Amplifier Type: Power
• Output Type: Single-Ended
• Board Type: Bare (Unpopulated)
• Utilized Ic / Part: PA240CX
• Product: Amplifier Modules
• Description/function: Audio Amplifiers
• For Use With/related Products: PA240CX
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Operating Temperature: -
• Current - Output / Channel: -
• Voltage - Supply, Single/dual (±): -
• -3db Bandwidth: -
• Slew Rate: -
• Current - Supply (main Ic): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1391

CAGE JACKS
MS11
jacks. The strip can easily be cut to any desired number of
cage jacks. These are mounted directly in a print circuit board.
After soldering, the carrier is pulled off the cage jacks. Use
a spacer between the PCB and the heatsink to avoid short
circuits.
APEX MICROTECHNOLOGY CORPORATION • 5980 NORTH SHANNON ROAD • TUCSON, ARIZONA 85741 • USA • APPLICATIONS HOTLINE: [phone]
2
This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible inaccuracies or omissions. All specifications are subject to change without notice.
Part number MS11 consists of a carrier strip of 30 cage
AN SA60 REV B JUNE 2005 © 2005 Apex Microtechnology Corp.
THERMAL WASHER
TW14
NOTES:
1. Base material is Kapton MT, 0.002” thick.
2. For optimum thermal transfer, avoid abrasive handling of
3. The dry thermal compound will flow filling header to heatsink
4. Do not store unused thermal washers above 40°C.
5. A new washer must be used for each mounting.
6. Part number TW14 consists of a package of 10 washers.
7. Thermal resistance is 0.17°C/W.
washers which can damage their 0.5mil thick layer of thermal
compound with which each side is coated.
voids as soon as the material reached 60°C.