SOT89-3EV-VREG Microchip Technology, SOT89-3EV-VREG Datasheet - Page 12

• Manufacturer Part Number: SOT89-3EV-VREG
• Description: BOARD EVAL SOT89-3 VOLTAGE REG
• Manufacturer: Microchip Technology

Specifications of SOT89-3EV-VREG

• Channels Per Ic: 1 - Single
• Regulator Type: Positive Fixed
• Board Type: Partially Populated
• Utilized Ic / Part: SOT-89-3 Package
• Silicon Manufacturer: Microchip
• Application Sub Type: Voltage Regulator
• Kit Application Type: Power Management - Voltage Regulator
• Silicon Core Number: MCP1700A, MCP1701A, MCP1702, MCP1703
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output: -
• Voltage - Output: -
• Voltage - Input: -
• Operating Temperature: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

MCP1700
5.0
The MCP1700 CMOS low dropout linear regulator is
intended for applications that need the lowest current
consumption
regulation. The operating continuous load range of the
MCP1700 is from 0 mA to 250 mA (V
input operating voltage range is from 2.3V to 6.0V,
making it capable of operating from two, three or four
alkaline cells or a single Li-Ion cell battery input.
5.1
The input of the MCP1700 is connected to the source
of the P-Channel PMOS pass transistor. As with all
LDO circuits, a relatively low source impedance (10Ω)
is needed to prevent the input impedance from causing
the LDO to become unstable. The size and type of the
capacitor needed depends heavily on the input source
type (battery, power supply) and the output current
range of the application. For most applications (up to
100 mA), a 1 µF ceramic capacitor will be sufficient to
ensure circuit stability. Larger values can be used to
improve circuit AC performance.
DS21826B-page 12
FUNCTIONAL DESCRIPTION
Input
while
maintaining
output
R
≥ 2.5V). The
voltage
5.2
The maximum rated continuous output current for the
MCP1700 is 250 mA (V
where V
200 mA.
A minimum output capacitance of 1.0 µF is required for
small signal stability in applications that have up to
250 mA output current capability. The capacitor type
can be ceramic, tantalum or aluminum electrolytic. The
esr range on the output capacitor can range from 0Ω to
2.0Ω.
5.3
When powering up the internal reference output, the
typical output rise time of 500 µs is controlled to
prevent overshoot of the output voltage.
Output
Output Rise time
R
< 2.5V, the maximum output current is
© 2007 Microchip Technology Inc.
R
≥ 2.5V). For applications