LM3673TL-1.5EV National Semiconductor, LM3673TL-1.5EV Datasheet - Page 2

• Manufacturer Part Number: LM3673TL-1.5EV
• Description: BOARD EVALUATION LM3673TL-1.5
• Manufacturer: National Semiconductor
• Series: PowerWise®r

Specifications of LM3673TL-1.5EV

• Main Purpose: DC/DC, Step Down
• Outputs And Type: 1, Non-Isolated
• Voltage - Output: 1.5V
• Current - Output: 350mA
• Voltage - Input: 2.7 ~ 5.5V
• Regulator Topology: Buck
• Frequency - Switching: 2MHz
• Board Type: Fully Populated
• Utilized Ic / Part: LM3673
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Power - Output: -

www.national.com
Connection Diagram and Package Mark Information
Pin Descriptions (5-Bump MicroSMD)
Pin #
C1
C3
A1
A3
B2
FIGURE 3. 5-Bump MicroSMD Package NS Package Number TLA05CBA
Name
GND
SW
V
EN
FB
IN
FIGURE 2. Typical Application Circuit for ADJ version
Description
Power supply input. Connect to the input filter capacitor (Figure 1).
Ground pin.
Enable pin. The device is in shutdown mode when voltage to this pin is <0.4V and enabled
when >1.0V. Do not leave this pin floating.
Feedback analog input. Connect directly to the output filter capacitor for fixed voltage
versions. For adjustable version external resistor dividers are required (Figure 2). The
internal resistor dividers are disabled for the adjustable version.
Switching node connection to the internal PFET switch and NFET synchronous rectifier.
2
20183331
20183344