MAX1402EVC16 Maxim Integrated Products, MAX1402EVC16 Datasheet - Page 3

• Manufacturer Part Number: MAX1402EVC16
• Description: EVAL KIT FOR MAX1402
• Manufacturer: Maxim Integrated Products

Specifications of MAX1402EVC16

• Number Of Adc's: 1
• Number Of Bits: 18
• Sampling Rate (per Second): 480
• Data Interface: Serial
• Inputs Per Adc: 6 Single Ended
• Input Range: ±VREF/2
• Power (typ) @ Conditions: 26.7mW @ 480SPS
• Voltage Supply Source: Analog and Digital
• Operating Temperature: 0°C ~ 70°C
• Utilized Ic / Part: MAX1402
• Interface Type: SMA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MAX1402

5) Connect the USBTO232 board to the 68HC16MODULE-
6) The MAX1402 EV kit software should have already
7) Start the MAX1402 program by opening its icon in
8) Turn on power supply and slide SW1 to the ON
9) When the software successfully establishes com-
10) Apply input signals to the inputs labeled
Before beginning, the following equipment is needed:
• MAX1402 EV system:
• A DC power supply that generates +8VDC to
• A user-supplied Windows 98/2000/XP computer with
• A serial cable to connect the computer’s serial port to
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and
Recommended Equipment (RS-232-to-COM
UNMAXIM.EXE
+12VDC at 30–50mA
an available serial communications port, preferably a
9-pin plug
the 68HC16MODULE-DIP
INSTALL.EXE
UNINST.INI
switch, along the top-edge of the µC module.
Observe the polarity marked on the board.
DIP module if you have not done so already.
been downloaded and installed in the USBTO232
Quick Start.
the Start | Programs menu.
position on the 68HC16MODULE-DIP module.
Press the OK button to automatically connect and
download the KIT1402.C16 file to the module.
munication with the EV kit board, you will see a con-
figuration tool and some other windows. Verify that
the CLKIN and reference voltage settings are cor-
rect. Close or minimize this dialog box.
AIN1–AIN5, at the bottom-edge of the MAX1402 EV
kit board. AIN6 is analog common. Observe the
readout on the screen.
MAX1402 EV kit
68HC16MODULE-DIP
FILE
MAX1402 Evaluation Kit/Evaluation System
Installs the EV kit files on your computer.
Database for uninstall program.
Removes the EV kit files from your
computer. This file is automatically copied
to C:\WINDOWS during installation.
_______________________________________________________________________________________
Port/PC Connection Option)
DESCRIPTION
underlined refers to items from the Windows
98/2000/XP operating system.
1) Visit the Maxim website (www.maxim-ic.com/evkit-
2) Install the MAX1402 EV kit software on your com-
3) Make sure your 68HC16MODULE-DIP module has
4) Carefully connect the boards by aligning the 40-pin
5) Connect the DC power source to the µC module at
6) Connect a cable from the computer’s serial port to
7) Start the MAX1402 program by opening its icon in
8) Turn the power on and slide SW1 to the ON posi-
9) When the software successfully establishes com-
UNMAXIM.EXE
INSTALL.EXE
UNINST.INI
software) to download the latest version of the EV
kit software. Save the EV kit software to a temporary
folder and uncompress the file (if it is a .zip file).
puter by running the INSTALL.EXE program. The
program files are copied and icons are created for
them in the Windows Start | Programs menu.
the Rev. 2.0 ROM. The software will not function with
the Rev. 1.0 ROM.
header of the MAX1402 EV kit with the 40-pin con-
nector of the 68HC16MODULE-DIP module. Gently
press them together. The two boards should be
flush against one another.
terminal block J2, located next to the ON/OFF
switch, along the top-edge of the µC module.
Observe the polarity marked on the board.
the µC module. If using a 9-pin serial port, use a
straight-through, 9-pin female-to-male cable. If the
only available serial port uses a 25-pin connector, a
standard 25-pin-to-9-pin adapter will be required.
The EV kit software checks the modem status lines
(CTS, DSR, and DCD) to confirm that the correct
port has been selected.
the Start | Programs menu.
tion. Select the correct serial port and press the OK
button. The program will automatically download
KIT1402.C16 to the module.
munication with the EV kit board, you will see a con-
figuration tool and some other windows. Verify that
the CLKIN and reference voltage settings are cor-
rect. Close or minimize this dialog box.
FILE
Installs the EV kit files on your computer.
Database for uninstall program.
Removes the EV kit files from your
computer. This file is automatically copied
to C:\WINDOWS during installation.
Connections and Setup
DESCRIPTION
3