MAX11614EVSYS+ Maxim Integrated Products, MAX11614EVSYS+ Datasheet - Page 9

• Manufacturer Part Number: MAX11614EVSYS+
• Description: EVALUATION SYSTEM FOR MAX11614
• Manufacturer: Maxim Integrated Products

Specifications of MAX11614EVSYS+

• Number Of Adc's: 1
• Number Of Bits: 8, 10, 12
• Sampling Rate (per Second): 94.4k
• Data Interface: I²C, Serial
• Inputs Per Adc: 8 Single or 4 Differential
• Voltage Supply Source: Single Supply
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: MAX11614
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The
supports all the MAX11600–MAX11617 ADC devices.
When the EV system software starts up, select the appro-
priate device from the Select the ADC device drop-
down list shown in Figure 1. Press the Select button to
bring up the main software window.
The main window of the evaluation software (Figure 2)
contains a Device Configuration group box, a Data
Logging group box, and four tab sheets to display the
sampled data.
The Device Configuration group box is used to
configure the selected ADC device.
Figure 3. Channel-Selection Reference Table
Detailed Description of Software
MAX11600–MAX11617
MAX11600–MAX11617 Evaluation System
_______________________________________________________________________________________
Device Configuration
EV
system
software
Use the drop-down list in the Ref Voltage and AIN_/REF
Setting group box to select the source of the voltage ref-
erence and configure the properties of the AIN_/REF pin
of the ADC device. If the source of the voltage reference
is set to VDD or external reference, enter the actual volt-
age value in the Reference Voltage edit box. This value
is used to calculate the voltage from the ADC code.
The drop-down list in the Channel Select group box
configures the ADC’s channel-selection register that
determines the analog input channels to be used for
conversion. Press the Info button to bring up a channel-
selection table for reference (Figure 3).
In the Scan Mode group box, use the drop-down list to
select one of the four scan modes. Press the Info button
to bring up a scanning configuration table for reference
(Figure 4).
9