SCUSB Cardinal Components Inc., SCUSB Datasheet - Page 25

• Manufacturer Part Number: SCUSB
• Description: EVALUATION KIT
• Manufacturer: Cardinal Components Inc.

Specifications of SCUSB

• Main Purpose: Timing, Reconfigurable Oscillators
• Utilized Ic / Part: Cardinal CDP Oscillators
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -

3.2.4 Reconfiguring an Oscillator
either clicking on the Load Jedec File button and selecting a
Jedec File from the list or click the Read EEPROM option
button and select a group from the EEPROM Status box.
values are shown. Insert an oscillator in the test socket and click
the Write Device button. After the blue status bar completes,
click the Read Device button and verify that the part was
reconfigured correctly.
into the socket properly. Also make sure that the SCUSB board
is powered. If the green light is lit on the daughter board then
power is applied and the communications should be OK. If a
problem still exists, unplug the Eval Board and reconnect. Click
the Close I2C button and then click the Open I2C button and
see if that solves the problem.
Select the data you want to configure the oscillator to by
Check the Outputs box and make sure that the correct
If all the Outputs read Off, check that the part is inserted