CDB5463U Cirrus Logic Inc, CDB5463U Datasheet - Page 14
![no-image](/images/manufacturer_photos/0/1/141/cirrus_logic_inc_sml.jpg)
CDB5463U
Manufacturer Part Number
CDB5463U
Description
BOARD EVAL & SOFTWARE CS5463 ADC
Manufacturer
Cirrus Logic Inc
Type
A/Dr
Specifications of CDB5463U
Main Purpose
Power Management, Energy/Power Meter
Embedded
Yes, MCU, 8-Bit
Utilized Ic / Part
CS5463
Primary Attributes
1-Phase, Energy-to-Frequency Output
Secondary Attributes
GUI, USB, SPI Interfaces
Product
Data Conversion Development Tools
Maximum Clock Frequency
4 MHz
Interface Type
USB
Supply Voltage (max)
5 V
Supply Voltage (min)
3.3 V
For Use With/related Products
CS5463
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
Other names
598-1553
2.4.8
The Control Register box contains various bits used to activate or terminate various features of the
CS5463. Refer to the CS5463 data sheet for descriptions of the bits. The user is able to turn each bit on
or off individually. The value of the Ctrl register is displayed in the HEX: field. Most of the Ctrl register bits
are reserved or unused. Only the usable bits are displayed in the Setup window.
2.4.9
The Operational Modes Register box contains various bits used to set different operation modes for the
CS5463 functions. Refer to the CS5463 data sheet for descriptions of the bits. The value of the Mode reg-
ister is displayed in the HEX: field. Many of the Mode register bits are reserved or unused. Only the usable
bits are displayed in the Setup window.
2.5
The Calibration window is used to display and write to the CS5463 offset and gain calibration registers.
The user is also able to initiate the CS5463's calibration sequences that are used to set the calibration
values. Both AC and DC calibrations can be performed for offset and gain, for either the voltage channel
or the current channel, or both simultaneously. The user should refer to the CS5463 data sheet for more
details on calibration.
The Refresh Screen button will update the contents of the screen by reading all the register values from
the CS5463. It is a good idea to press the Refresh Screen button when entering the Calibration window,
or after modifying any registers to reflect the current status of the CS5463.
14
Calibration Windows
Control Register
Operational Modes Register
Figure 9. Calibration Window
CDB5463U
DS805DB2